[kv260] generate chip temperature curve with xadc

How to... Without a thermometer , Monitor the temperature of the chip ？
Xilinx It not only provides built-in XADC To observe the temperature , Moreover, the following graph can be generated

The specific operation is as follows

One 、 open Vivado, choice Open Hardware Manager

Two 、 Click on Open target, Select... In the pop-up window Auto Connect

3、 ... and 、 Choose SysMon, Then select... Below Sensors

Now you can see the current temperature , Minimum temperature , Maximum temperature

Four 、 Generating curve

Above is the direct reading temperature value . What if we want to observe the temperature change for a long time ？

1. stay SysMon Right click , choice Dashboard,New Dashboard

2. stay New Dashboard Page direct point OK

3. Final curve

Here's the picture

4. Adjust the refresh speed

In the black curve area , Right click ,JTAG Scan Rate, Adjustment range from 1 Seconds to 60 second

5. Adjust the total display time of the curve

In the black curve area , Right click ,Track Time, Adjustment range from 1 Minutes to 20 minute