Network tester operation manual renix rack management

​ This paper mainly expounds xinertai BIGTAO series Related operation methods of network test instrument rack . The article is divided into frame addition 、 Shelf delete 、 Rack restart 、 Rack shutdown four parts .​

​​ Shelf management summary ​​

Shelf management

1. add to

2. Delete

3. restart

4. To turn it off

​ One 、​ Shelf management Add process ​​

1. Open software

2. Add port

3. Input IP Address

4. Frame IP Address

4.1 Check on the frame display

4.2 The default is 192.168.0.180

​ Two 、​ Shelf management Add results ​​

​ 3、 ... and 、​ Shelf management : Delete shelf ​​ ​​

1. Disconnect the boot box

1.1 Right click the shelf

1.2 choice ”Disconnect Chassis”

2. Delete shelf

2.1 Click on ”Delete Chassis”

2.2 Right click delete

3. Delete result

​ Four 、​ Shelf management : Restart the shelf ​​

1. Connect shelf

1.1 The shelf is in ”Connected” state

2. Restart steps

2.1 choice ”Tool”

2.2 choice ”Manage Hardware

2.3 Right click the shelf

2.4 choice ”Reboot Chassis”

​ 5、 ... and 、​ Shelf management : Restart result ​​

1. Restart the process

1.1 The shelf will become Down state

1.2 After restart , Turn into UP

​ 5、 ... and 、​ Shelf management : Turn off the chassis ​​

1. Connect shelf

The shelf is in ”Connected” state

2. Restart steps

2.1 choice ”Tool”

2.2 choice ”Manage Hardware

2.3 Right click the shelf

2.4 choice ”Shutdown Chassis”

​ 7、 ... and 、​ Shelf management : Close result ​​

1. Shelf status

1.1 The state will become Down

1.2 Equivalent to shutdown operation

​ 8、 ... and 、​ Shelf management : Hardware shutdown ​​

1. Power button

1.1 Click

1.2 Wait a minute or so , Automatic shutdown

2. You can't press... All the time

2.1 Keep pressing yes to force shutdown

2.2 System problems are easy to damage