Usage of hydraulic rotary joint

When installing the hydraulic swivel , We should not ignore the direction of rotation in the joint . If installed upside down , It may cause the machine to burn . therefore , At the beginning of the installation , It is necessary to keep the hydraulic rotary joint concentric with the connecting shaft .

1. The fuel gas must flow from the sleeve side to the plug side , The swivel joint uses the external thread sealing material of the control thread ;

2. When installing the joint thread , Do not exceed the maximum tightening torque , In case of damage ;

3. The rotating joint should not exceed the maximum pressure limit and temperature range , To prevent wear or leakage of sealing materials ;

4. When using swivel joints , No man-made damage , Do not use in places with dust or sundries , To prevent leakage ;

5. Do not use swivel joints in places where gas is trapped or where there is an open fire nearby ;

6. During tempering , Replace the new connector in time ;

7. When installing the hose on the swivel , Don't touch oil , To avoid natural fire . When installing the hose again , Cut off the end of the hose 3 centimeter .

Fuel gas can be transported over long distances through pipelines , It won't pollute the environment . When using mofuron technology rotary joint for transmission , We must pay attention to the above seven points , To ensure the safety and efficiency of transmission .