Songhan sn8p2511 sop8 single chip microcomputer can be used for burning, providing single chip microcomputer scheme development and single chip microcomputer decryption

Songhan SN8P2511 SOP8 Single chip microcomputer Substitute burning Provide MCU program development Single chip decryption

Product description ：

SN8P2511 It's one with RISC-like Systematic 8 Bit MCU , have *** And low power consumption .1T( An instruction cycle is a clock cycle ) structure ,16MIPS Computing power . in addition , high EFT Its performance makes it suitable for high interference industrial environment .SN8P2511 Of IC structure ***, Include 1K-word Program memory （OTP ROM）,48-byte Data storage （RAM）, Two 8 Bit timing counter （T0,TC0）, A watchdog timer ,3 Broken source （T0,TC0,INT0）, One channel PWM Output （PWM0）, One channel buzzer Output （BZ0） and 4 Layer stack buffer . SN8P2511 Also provide 4 Two different oscillator modes are used as the system clock ： Including high / Low speed crystal oscillator / Ceramic resonators and cheap RC oscillator . Besides ,SN8P2511 It also includes an internal 16MHz RC The oscillator acts as a system clock and an internal low frequency controlled by a program RC The oscillator acts as the system clock in low-speed mode .

characteristic ：

? ROM：1K * 16 bits

? RAM：48 * 8 bits

? 4 Layer stack buffer

? One way input ：P1.1

? The port triggered by changing the level ：P0,P1

? The external interrupt edge triggers ：P0.0, from PEDGE Buffer control

? Internal high speed clock ：16MHz RC oscillator

? Three paragraph LVD

? Two 8 Bit timer / Counter

? Most instruction cycles are just one clock cycle

? A clock cycle is an instruction cycle

? Built in watchdog timer

? Three interrupt sources

? Internal low speed clock ：RC oscillator ,16KHz/3V,32KHz/5V

? External high-speed clock ： Crystal 16MHz / RC,10 MHz

? Internal pull-up resistor ：P0,P1,P2,P5

? Programmable open collector input and output ：P1.0

? Bidirectional input / output ：P0,P1,P2,P5