Aitm3.0005 smoke toxicity test

AITM3.0005 Smoke toxicity test — Standard name

AITM3.0005 Determination of the Specific Gas Components of Smoke Generated by Component Parts or Sub-Assemblies of Aircraft Interior

AITM3.0005 Smoke toxicity test

 

AITM 3.0005 Smoke toxicity test — Introduction to the standard

AITM Full name Airbus Industries Test Methods, Airbus industrial test method ABD0031.AITM The standard outlines the fire safety design standard for the use of materials in the cabin of Airbus commercial aircraft , This refractory design standard relates to materials , components and parts , Combustion performance of components and system components . Including the corresponding airworthiness certification requirements and Airbus “ burning - smoke - toxicity ” Fire resistance requirements

AITM 3.0005 Smoke toxicity test — The test method

D6-51377  chapter 4.1 Issue F  and  BSS 7239  The test method

The following gases are required to be determined by this standard ：

－  carbon monoxide  CO
－  Hydrogen fluoride  HF
－  Hydrogen chloride  HCl
－  Nitrogen oxides  NOx
－  Sulfur dioxide  SO2
－  Hydrogen cyanide  HCN

AITM3.0005 Smoke toxicity test — Scope of application

Scope:

This Airbus specification describes a test method to determine the concentration of specific gas components of smoke released by materials tested in accordance to 1 and 2. This test method is intended to evaluate materials or constructions used in the interiors of aircrafts and other related vehicles but it may also be used for other purposes, specified in applicable procurement and regulatory documents.

Aircraft materials AITM Airbus standard /ABD0031 Series test  -  Test project

AITM2-0002 (AITM2.0002) 12s or 60s Vertical combustion test

AITM2-0003 (AITM2.0003) Horizontal combustion test

AITM2-0004 (AITM2.0004)  45 Degree angle combustion test

AITM2-0005 (AITM2.0005)  60 Degree angle combustion test

AITM2-0006 (AITM2.0006)  Combustion heat release test

AITM2-0007 (AITM2.0007)  Specific optical density measurement

AITM2-0008 (AITM2.0008)  Smoke density measurement

AITM2-0009 (AITM2.0009)  Seat cushion flammability test

AITM2-0010 (AITM2.0010)  Kerosene burner test

AITM2-0053 (AITM2.0053)  Flame propagation test of insulating materials

AITM2-0056 (AITM2.0056)  Flame penetration test of insulating materials

AITM3.0005 (AITM3.0005)  Smoke toxicity test

Reference standards

HB 6577  Test method for smoke density of non-metallic materials inside civil aircraft cabin

HB 7066 Toxicity measurement of non-metallic materials in engine room

For details, please consult ： Zhongke Yishuo （ Xiamen ） Fire Prevention Technology Service Co., Ltd

come from GF2022