MPPT solar charge controller data collection - through the gateway acquisition capacity battery SOC battery voltage, wi-fi

The solar charge controller can detect theGenerates power and tracks the highest voltage-current value (VI), allowing the system to charge the battery with maximum power output.It is used in solar off-grid photovoltaic systems to coordinate the work of solar panels, batteries, and loads, and is the core control component of off-grid photovoltaic systems.The liquid crystal is used to dynamically display the running status, running parameters, controller log, control parameters, etc.Users can easily check various parameters through the keys, and can modify the control parameters according to their needs to adapt to different system requirements.
MPPT tracking efficiency up to 99.9%.
The maximum power point tracking (Maximum Power Point Tracking, MPPT) system is an advanced charging technology that adjusts the working state of the electrical module to enable the battery board to output more power.Due to the nonlinear characteristics of the solar array, there is a maximum energy output point (maximum power point) of the array on its curve, and the traditional controller (switching charging technology and PWM charging technology) cannot maintain this point to charge the battery, so it is alsoThe maximum energy of the panel cannot be obtained, but the solar controller with MPPT control technology can always track the maximum power point of the array to obtain the maximum energy to charge the battery.
◆ Using advanced digital power technology, the circuit energy conversion efficiency is as high as 98%.
◆ Support different types of battery charging procedures such as gel battery, sealed battery, open battery, lithium battery, etc.
◆ With current-limiting charging mode, when the power of the battery board is too large and the charging current is greater than the rated current, the controller will automatically reduceThe charging power makes it work at the rated charging current.
◆ It can support instantaneous high-current startup of capacitive load.
◆ Support automatic identification of battery voltage.
◆ With fault LED indication and liquid crystal display abnormal information, it is convenient for users to determine the system fault.
◆ Support historical data storage, the storage time is up to 1 year.
◆ Equipped with LCD screen display function, you can check the operation data and status of the equipment, and support the change of controller parameters.
Data collection scheme:
Solar charge controller data collection, collect battery voltage, battery capacity, battery power SOC through gateway, wifi transmission
{“voltage”:12.3v,"qoe":57%,"deviceCode":"TYN-01"}