Runhe hi3516 development board openharmony small system and standard system burning

Here are some of the Moistening Hi3516 Development board burning .
at present Runhe Hi3516 Development board Support 3 A system , Namely ：
（1） Small system （liteos-a kernel ）
（2） Small system （Linux kernel ）
（3） Standard system

Small system （liteos-a kernel ）

Small system liteos-a Kernel compilation ,hb set choice ipcamera_hispark_taurus

Burning guide diagram ：
, Set up the server IP、 Development board IP、 Launch parameters .

Log in and copy

setenv serverip 192.168.3.60
setenv ipaddr 192.168.3.100

setenv bootargs "console=ttyAMA0,115200n8 root=emmc fstype=vfat rootaddr=10M rootsize=30M rw";

saveenv

     

      
1.
      
2.
      
3.
      
4.
      
5.
      
6.
     

The configuration is as follows ： Select network port burning 、 Pay attention to modifying the server IP、IP Address 、 gateway , choice emmc burn ,

Small system （linux kernel ）

hb set choice ipcamera_hispark_taurus_linux

Burning guide diagram ：
, Set up the server IP、 Development board IP、 Launch parameters .

Log in and copy

setenv serverip 192.168.3.60
setenv ipaddr 192.168.3.100

setenv bootargs "mem=128M console=ttyAMA0,115200 root=/dev/mmcblk0p3 rw rootfstype=ext4 rootwait blkdevparts=mmcblk0:1M(boot),9M(kernel),50M(rootfs),50M(userfs),1024M(userdata)"
setenv bootcmd "mmc read 0x0 0x82000000 0x800 0x4800;mw 0x10FF0044 0X600;mw 0x120D2010 0x00000000;mw 0x120D2400 0x000000ff;mw 0x120D2010 0x00000000;bootm 0x82000000"

saveenv

     

      
1.
      
2.
      
3.
      
4.
      
5.
      
6.
      
7.
     

The configuration is as follows ： Select network port burning 、 Pay attention to modifying the server IP、IP Address 、 gateway , choice emmc burn

Standard system

Compile command ：./build.sh --product-name Hi3516DV300 --ccache
, Set up the server IP、 Development board IP、 Launch parameters .

Log in and copy

setenv serverip 192.168.3.60
setenv ipaddr 192.168.3.100

setenv bootargs "mem=640M console=ttyAMA0,115200   mmz=anonymous,0,0xA8000000,384M clk_ignore_unused androidboot.selinux=permissive skip_initramfs rootdelay=1 init=/init root=/dev/mmcblk0p3 rootfstype=ext4 rw blkdevparts=mmcblk0:1M(boot),15M(kernel),3307M(system),256M(vendor),-(userdata)"

saveenv

     

      
1.
      
2.
      
3.
      
4.
      
5.
      
6.
     

The configuration is as follows ： Select network port burning 、 Pay attention to modifying the server IP、IP Address 、 gateway , choice emmc burn

  Want to know more about Hongmeng , Please visit ：

 51CTO Hongmeng technology community jointly built with Huawei officials

 https://harmonyos.51cto.com/#bkwz