Lumiprobe nucleic acid quantitative qudye dsDNA br detection kit

AI Meijie Lumiprobe QuDye dsDNA BR  Test kit ：

For use with a fluorometer in  100 pg/µL  to  1000 ng/µL  The wide range of accurate  DNA  ration . The resistance to common pollutants in the test is good , Only  1-20 µL  Experimental sample . The measurement is carried out at room temperature .

AI Meijie Lumiprobe QuDye dsDNA BR  Test kit ：

For use with a fluorometer （ Any version can ） For a wide range of double chains  DNA  Quantitative . The kit includes  QuDye dsDNA BR  Fluorescent dye concentrate  200x、 Buffer solution and... For preparing dye working solution  DNA  Concentration standard （0  and  100 ng/µL）.QuDye dsDNA BR  Reagent pair double chain  DNA  Be selective , Therefore, the measurement results are not affected by  RNA、 Effects of free nucleotides or protein contaminants . salt 、 A small amount of other pollutants such as detergent and solvent have no significant effect on the measurement results . This kit allows you to  100 pg/µL  to  1000 ng/µL  Accurately test the initial sample within the range  dsDNA  ration （ Used for measurement  DNA  Quantity range ：200 µL  The test sample contains  2–1000 ng DNA）.

AI Meijie  Lumiprobe QuDye dsDNA BR  Test kit The main ingredient of is  QuDye dsDNA BR  Fluorescent dyes , It can be selectively associated with  DNA  Interaction , And with  DNA  Molecules exhibit enhanced fluorescence when bound . The kit can be conveniently used in a wide concentration range  dsDNA  ration , And do not need a large number of initial samples （ Determination needs  1–20 µL）. All measurements were made at room temperature , The average time taken  15-20  minute （ Depends on the sample quantity ）. The sample fluorescence is stable  3  Hours . To measure , Please prepare the dye working solution , Dilute in a separate tube  DNA  Standard and experimental samples , And use a fluorometer to measure the fluorescence .

The kit can also be used with QuDye  Protein quantitative kit is used together , To determine  DNA  Protein contamination in the sample .

If it is necessary to quantify a lower concentration of  dsDNA, Please use QuDye dsDNA HS  Test kit , The initial sample concentration range is  10 pg/µL  to  100 ng/µL.

AI Meijie  Lumiprobe QuDye dsDNA BR  Test kit Related research ：

Pico488 dsDNA  Quantitative kit

Use  Pico488  Fluorescent dye quantification  dsDNA  The kit for .

QuDye dsDNA HS  Test kit

For high sensitivity  (HS)  And the measurement range ranges from  10 pg/uL  To  100 ng/uL  Fluorometer optimized off the shelf kit

QuDye ssDNA  Test kit

Use a fluorometer to accurately 、 Sensitive quantification of single chain  DNA  Ready to use kits ; initial  ssDNA  The measurement range of the sample is  50 pg/μL  to  200 ng/μL.

Pico488 dsDNA  Quantitative reagent ,200x DMSO  solution

Pico488  It's a dye , Used in the presence of  RNA、ssDNA  And other impurities  dsDNA  Perform more accurate quantification based on fluorescence . The dye shows bright fluorescence in the fluorescein channel , At low  pg/mL  Supreme  ng/mL  Within the scope of  DNA  Concentration provides a linear response .

ProteOrange  Protein quantitative reagent ,500x

Sensitive fluorescent detection reagent  500x  Concentrate , Protein samples for quantitative purification . The reagent showed minimal variability of different proteins .