VLAN experiment

The experimental requirements :

1/pc1 and pc3 The interface is access; pvlan vlan2;
2/PC2/4/5/6 In the same network segment ; among PC2 You can visit PC4/5/6; but PC4 You can visit PC5, Cannot access PC6

2 pc5 Cannot access PC6

3、PC1/3 And PC2/4/5/6 be not in - - Net segment

4、 all PC adopt DHCP obtain ip Address , And PC1/3 Normal access

SW1 To configure

[sw1]vlan batch 2 to 5

[sw1]int g0/0/2
[sw1-GigabitEthernet0/0/2]port link-type access 
[sw1-GigabitEthernet0/0/2]port default vlan 2
[sw1-GigabitEthernet0/0/2]int g0/0/3
[sw1-GigabitEthernet0/0/3]port hybrid pvid vlan 3
[sw1-GigabitEthernet0/0/3]port hybrid untagged vlan 3 to 5
[sw1-GigabitEthernet0/0/3]int g0/0/4
[sw1-GigabitEthernet0/0/4]port link-type trunk 	
[sw1-GigabitEthernet0/0/4]port trunk allow-pass vlan 2 to 5
[sw1-GigabitEthernet0/0/4]int g0/0/1
[sw1-GigabitEthernet0/0/1]port hybrid  tagged vlan 2
[sw1-GigabitEthernet0/0/1]port hybrid untagged vlan 3 to 5

SW2 To configure

[sw2]vlan batch 2 to 5
[sw2]int g0/0/1
[sw2-GigabitEthernet0/0/1]port link-type trunk 
[sw2-GigabitEthernet0/0/1]port trunk allow-pass vlan 2 to 5
[sw2-GigabitEthernet0/0/1]int g0/0/2
[sw2-GigabitEthernet0/0/2]port link-type access 
[sw2-GigabitEthernet0/0/2]port default vlan 2
[sw2-GigabitEthernet0/0/2]int g0/0/3
[sw2-GigabitEthernet0/0/3]port hybrid pvid vlan 4
[sw2-GigabitEthernet0/0/3]port hybrid untagged vlan 3 to 4
[sw2-GigabitEthernet0/0/3]int g0/0/4
[sw2-GigabitEthernet0/0/4]port link-type trunk 
[sw2-GigabitEthernet0/0/4]port trunk  allow-pass  vlan  2 to 5

SW3 To configure

[sw3]vlan batch 2 to 5
[sw3]int g0/0/1
[sw3-GigabitEthernet0/0/1]port link-type trunk 
[sw3-GigabitEthernet0/0/1]port trunk allow-pass  vlan 2 to 5
[sw3-GigabitEthernet0/0/1]int g0/0/2
[sw3-GigabitEthernet0/0/2]port hybrid pvid vlan 4
[sw3-GigabitEthernet0/0/2]port hybrid untagged vlan 3 to 4
[sw3-GigabitEthernet0/0/2]int g0/0/3
[sw3-GigabitEthernet0/0/3]port hybrid pvid vlan 5
[sw3-GigabitEthernet0/0/3]port hybrid untagged vlan 3 to 5

Router configuration

[r1]dhcp enable 
[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]ip add 192.168.1.1 24
[r1-GigabitEthernet0/0/0]dhcp select global
[r1-GigabitEthernet0/0/0]int g0/0/0.1
[r1-GigabitEthernet0/0/0.1]ip add 192.168.2.1 24
[r1-GigabitEthernet0/0/0.1]dot1q termination vid 2
[r1-GigabitEthernet0/0/0.1]arp broadcast enable 
[r1-GigabitEthernet0/0/0.1]dhcp select global 
[r1]ip pool p1
[r1-ip-pool-p1]network 192.168.1.0 mask 24
[r1-ip-pool-p1]gateway-list 192.168.1.1
[r1-ip-pool-p1]q
[r1]ip pool p2
[r1-ip-pool-p2]network 192.168.2.0 mask  24
[r1-ip-pool-p2]gateway-list 192.168.2.1

pc1 To 6 Get the address
PC1：192.168.2.254
PC2： 192.168.1.254
PC3：192.168.2.253
PC4：192.168.1.253
PC5：192.168.1.252
PC6：192.168.1.251

PC2 Sure ping through PC4/5/6

PC4 Access to PC5 Cannot access PC6

The experiment is finished ！