Aitm 2-0003 horizontal combustion test

AITM 2-0003 Horizontal combustion test — Standard name

AITM 2-0003 Resistance of Materials when tested according to the 15s Horizontal Bunsen Burner Test

AITM 2-0003 Horizontal combustion test

AITM 2-0003 Horizontal combustion test — Introduction to the standard

AITM Full name Airbus Industries Test Methods, Airbus industrial test method ABD0031.AITM The standard outlines the fire safety design standard for the use of materials in the cabin of Airbus commercial aircraft , This refractory design standard relates to materials , components and parts , Combustion performance of components and system components . Including the corresponding airworthiness certification requirements and Airbus “ burning - smoke - toxicity ” Fire resistance requirements

AITM 2-0003 Horizontal combustion test — Scope of application

Scope:

This test method is developed to determine the resistance of materials to horizontal flame propagation when subjected to a small flame. Generally, it is intende for the evaluation of materials or constructions used in the interiours of aircrafts or other related vehicles, but it may be used for other puposes as specified in applicable procurement and regulatory documents.

AITM 2-0003 Horizontal combustion test — The test method

The test piece used in this test is 3 individual , The thickness is the thickness used . From where the flame is applied , stay 292mm and 38mm There is a mark at the . The position of the test piece is horizontal . The ignition source is Bunsen lamp . The application time of flame is 15s. Test its maximum flame propagation rate

Aircraft materials AITM Airbus standard /ABD0031 Series test  -  Test project

AITM2-0002 (AITM2.0002) 12s or 60s Vertical combustion test

AITM2-0003 (AITM2.0003) Horizontal combustion test

AITM2-0004 (AITM2.0004)  45 Degree angle combustion test

AITM2-0005 (AITM2.0005)  60 Degree angle combustion test

AITM2-0006 (AITM2.0006)  Combustion heat release test

AITM2-0007 (AITM2.0007)  Specific optical density measurement

AITM2-0008 (AITM2.0008)  Smoke density measurement

AITM2-0009 (AITM2.0009)  Seat cushion flammability test

AITM2-0010 (AITM2.0010)  Kerosene burner test

AITM2-0053 (AITM2.0053)  Flame propagation test of insulating materials

AITM2-0056 (AITM2.0056)  Flame penetration test of insulating materials

AITM3.0005 (AITM3.0005)  Smoke toxicity test

AITM 2-0003 Horizontal combustion test — Other relevant standards

Airbus standard ：ABD 0031 - airbus fire testing – flame, smoke and toxicity

Boeing standard smoke test ：BSS7238 fire testing to smoke density

Boeing standard toxicity test ：BSS7239 fire testing to toxicity

American Standard smoke density ：ASTM E 662 fire testing to Smoke Density

come from GF2022