当前位置：网站首页>postgresql之page分配管理(一)

postgresql之page分配管理(一)

2022-08-01 12:46:00 【happytree001】

一、简介

postgresql是多进程架构，同时也是一个庞大的共享内存系统，大部分的数据都是在共享内存中，供多进程进行协作处理，今天主要是buffer（page）。

二、page 大小

page默认大小是8kB,可以在编译时进行调整，最大32kB

2.1 如何配置

configure.ac

#
# Block size
#
AC_MSG_CHECKING([for block size])
PGAC_ARG_REQ(with, blocksize, [BLOCKSIZE], [set table block size in kB [8]],
             [blocksize=$withval],
             [blocksize=8])
case ${blocksize} in
  1) BLCKSZ=1024;;
  2) BLCKSZ=2048;;
  4) BLCKSZ=4096;;
  8) BLCKSZ=8192;;
 16) BLCKSZ=16384;;
 32) BLCKSZ=32768;;
  *) AC_MSG_ERROR([Invalid block size. Allowed values are 1,2,4,8,16,32.])
esac
AC_MSG_RESULT([${blocksize}kB])

AC_DEFINE_UNQUOTED([BLCKSZ], ${BLCKSZ}, [
 Size of a disk block --- this also limits the size of a tuple.  You
 can set it bigger if you need bigger tuples (although TOAST should
 reduce the need to have large tuples, since fields can be spread
 across multiple tuples).

 BLCKSZ must be a power of 2.  The maximum possible value of BLCKSZ
 is currently 2^15 (32768).  This is determined by the 15-bit widths
 of the lp_off and lp_len fields in ItemIdData (see
 include/storage/itemid.h).

 Changing BLCKSZ requires an initdb.
])

默认值为8kB,可以通过 --with-blocksize=x进行设置，x取值范围[1,2,4,8,16,32], 最大值32768，2的15次方

2.2 为啥最大只能32kB

src/include/storage/itemid.h

typedef struct ItemIdData
{
    
	unsigned	lp_off:15,		/* offset to tuple (from start of page) */
				lp_flags:2,		/* state of line pointer, see below */
				lp_len:15;		/* byte length of tuple */
} ItemIdData;

指定每个记录在page中的偏移量和长度字段只有15bit，这就限制了page的大小。

三、初始化

postgresql在启动时，会进行相应的初始化。

初始化调用栈

src/backend/main/main.c
main()
	src/backend/postmaster/postmaster.c
	PostmasterMain()
		reset_shared();
			src/backend/storage/ipc/ipci.c
			CreateSharedMemoryAndSemaphores()
				src/backend/storage/buffer/buf_init.c
				InitBufferPool();
					src/backend/storage/buffer/freelist.c
					StrategyInitialize(!foundDescs);
						src/backend/storage/buffer/buf_table.c
						InitBufTable(NBuffers + NUM_BUFFER_PARTITIONS);

void
CreateSharedMemoryAndSemaphores(void)
{
    
	...
//第一步 计算总共需要的共享内存大小
		size = 100000;
		...
		size = add_size(size, BufferShmemSize());
		size = add_size(size, LockShmemSize());
		...
		
//第二步 将计算的size进行8k对齐 
		/* might as well round it off to a multiple of a typical page size */
		size = add_size(size, 8192 - (size % 8192));

	
// 第三步 创建共享内存
		seghdr = PGSharedMemoryCreate(size, &shim);

// 第四步 初始化共享内存各个部分
		InitShmemAccess(seghdr);

		
	/* * Set up shared memory allocation mechanism */
	if (!IsUnderPostmaster)
		InitShmemAllocation();

	/* * Now initialize LWLocks, which do shared memory allocation and are * needed for InitShmemIndex. */
	CreateLWLocks();

	/* * Set up shmem.c index hashtable */
	InitShmemIndex();

	dsm_shmem_init();

	...
	InitBufferPool();

	/* * Set up lock manager */
	InitLocks();

	/* * Set up predicate lock manager */
	InitPredicateLocks();

	/* * Set up process table */
	if (!IsUnderPostmaster)
		InitProcGlobal();
	CreateSharedProcArray();
	CreateSharedBackendStatus();
	TwoPhaseShmemInit();
	BackgroundWorkerShmemInit();

	/* * Set up shared-inval messaging */
	CreateSharedInvalidationState();

	/* * Set up interprocess signaling mechanisms */
	PMSignalShmemInit();
	ProcSignalShmemInit();
	CheckpointerShmemInit();
	AutoVacuumShmemInit();
	ReplicationSlotsShmemInit();
	ReplicationOriginShmemInit();
	WalSndShmemInit();
	WalRcvShmemInit();
	PgArchShmemInit();
	ApplyLauncherShmemInit();

	/* * Set up other modules that need some shared memory space */
	SnapMgrInit();
	BTreeShmemInit();
	SyncScanShmemInit();
	AsyncShmemInit();
	...
}

这里主要关注InitBufferPool

3.1 创建buffer

src/backend/utils/init/globals.c

int			NBuffers = 1000;

src/backend/storage/buffer/buf_init.c

void
InitBufferPool(void)
{
    
	...

	/* Align descriptors to a cacheline boundary. */
	BufferDescriptors = (BufferDescPadded *)
		ShmemInitStruct("Buffer Descriptors",
						NBuffers * sizeof(BufferDescPadded),
						&foundDescs);

	BufferBlocks = (char *)
		ShmemInitStruct("Buffer Blocks",
						NBuffers * (Size) BLCKSZ, &foundBufs);

	/* Align condition variables to cacheline boundary. */
	BufferIOCVArray = (ConditionVariableMinimallyPadded *)
		ShmemInitStruct("Buffer IO Condition Variables",
						NBuffers * sizeof(ConditionVariableMinimallyPadded),
						&foundIOCV);
}

3.2 初始化buffer header

		/* * Initialize all the buffer headers. */
		for (i = 0; i < NBuffers; i++)
		{
    
			BufferDesc *buf = GetBufferDescriptor(i);

			CLEAR_BUFFERTAG(buf->tag);

			pg_atomic_init_u32(&buf->state, 0);
			buf->wait_backend_pid = 0;

			buf->buf_id = i;

			/* * Initially link all the buffers together as unused. Subsequent * management of this list is done by freelist.c. */
			buf->freeNext = i + 1;

			...
		}

		/* Correct last entry of linked list */
		GetBufferDescriptor(NBuffers - 1)->freeNext = FREENEXT_END_OF_LIST;
	}

四、buffer组织管理

buffer已经有了，但是要如何快速的找到一个buffer？哪些buffer没有使用？哪些已经使用？这里使用了一个hash表以及一个freelist。

4.1 创建hashtable

void
InitBufTable(int size)
{
    
	HASHCTL		info;

	/* assume no locking is needed yet */

	/* BufferTag maps to Buffer */
	info.keysize = sizeof(BufferTag);
	info.entrysize = sizeof(BufferLookupEnt);
	info.num_partitions = NUM_BUFFER_PARTITIONS;

	SharedBufHash = ShmemInitHash("Shared Buffer Lookup Table",
								  size, size,
								  &info,
								  HASH_ELEM | HASH_BLOBS | HASH_PARTITION);
}

HTAB *
ShmemInitHash(const char *name,		/* table string name for shmem index */
			  long init_size,	/* initial table size */
			  long max_size,	/* max size of the table */
			  HASHCTL *infoP,	/* info about key and bucket size */
			  int hash_flags)	/* info about infoP */
{
    
	...
	/* look it up in the shmem index */
	location = ShmemInitStruct(name,
							   hash_get_shared_size(infoP, hash_flags),
							   &found);
  ...

Size
hash_get_shared_size(HASHCTL *info, int flags)
{
    
	Assert(flags & HASH_DIRSIZE);
	Assert(info->dsize == info->max_dsize);
	return sizeof(HASHHDR) + info->dsize * sizeof(HASHSEGMENT);
}

4.2 初始化hashtable

src/backend/utils/hash/dynahash.c

static bool
init_htab(HTAB *hashp, long nelem)
{
    
	HASHHDR    *hctl = hashp->hctl;
	HASHSEGMENT *segp;
	int			nbuckets;
	int			nsegs;
	int			i;

	/* * initialize mutexes if it's a partitioned table */
	if (IS_PARTITIONED(hctl))
		for (i = 0; i < NUM_FREELISTS; i++)
			SpinLockInit(&(hctl->freeList[i].mutex));

	/* * Allocate space for the next greater power of two number of buckets, * assuming a desired maximum load factor of 1. */
	nbuckets = next_pow2_int(nelem);

	/* * In a partitioned table, nbuckets must be at least equal to * num_partitions; were it less, keys with apparently different partition * numbers would map to the same bucket, breaking partition independence. * (Normally nbuckets will be much bigger; this is just a safety check.) */
	while (nbuckets < hctl->num_partitions)
		nbuckets <<= 1;

	hctl->max_bucket = hctl->low_mask = nbuckets - 1;
	hctl->high_mask = (nbuckets << 1) - 1;

	/* * Figure number of directory segments needed, round up to a power of 2 */
	nsegs = (nbuckets - 1) / hctl->ssize + 1;
	nsegs = next_pow2_int(nsegs);
....

	/* Allocate initial segments */
	for (segp = hashp->dir; hctl->nsegs < nsegs; hctl->nsegs++, segp++)
	{
    
		*segp = seg_alloc(hashp);
		if (*segp == NULL)
			return false;
	}

	/* Choose number of entries to allocate at a time */
	hctl->nelem_alloc = choose_nelem_alloc(hctl->entrysize);

	return true;
}

static HASHSEGMENT
seg_alloc(HTAB *hashp)
{
    
	HASHSEGMENT segp;

	CurrentDynaHashCxt = hashp->hcxt;
	segp = (HASHSEGMENT) hashp->alloc(sizeof(HASHBUCKET) * hashp->ssize);

	if (!segp)
		return NULL;

	MemSet(segp, 0, sizeof(HASHBUCKET) * hashp->ssize);

	return segp;
}

4.3 创建freelist

src/backend/utils/hash/dynahash.c

...
for (i= 0; i < freelist_partitions; i++)
{
    
	int			temp = (i == 0) ? nelem_alloc_first : nelem_alloc;

	if (!element_alloc(hashp, temp, i))
		ereport(ERROR,
				(errcode(ERRCODE_OUT_OF_MEMORY),
				 errmsg("out of memory")));
}
...

static bool
element_alloc(HTAB *hashp, int nelem, int freelist_idx)
{
    
	HASHHDR    *hctl = hashp->hctl;
	Size		elementSize;
	HASHELEMENT *firstElement;
	HASHELEMENT *tmpElement;
	HASHELEMENT *prevElement;
	int			i;

	if (hashp->isfixed)
		return false;

	/* Each element has a HASHELEMENT header plus user data. */
	elementSize = MAXALIGN(sizeof(HASHELEMENT)) + MAXALIGN(hctl->entrysize);

	CurrentDynaHashCxt = hashp->hcxt;
	firstElement = (HASHELEMENT *) hashp->alloc(nelem * elementSize);

	if (!firstElement)
		return false;

	/* prepare to link all the new entries into the freelist */
	prevElement = NULL;
	tmpElement = firstElement;
	for (i = 0; i < nelem; i++)
	{
    
		tmpElement->link = prevElement;
		prevElement = tmpElement;
		tmpElement = (HASHELEMENT *) (((char *) tmpElement) + elementSize);
	}

	/* if partitioned, must lock to touch freeList */
	if (IS_PARTITIONED(hctl))
		SpinLockAcquire(&hctl->freeList[freelist_idx].mutex);

	/* freelist could be nonempty if two backends did this concurrently */
	firstElement->link = hctl->freeList[freelist_idx].freeList;
	hctl->freeList[freelist_idx].freeList = prevElement;

	if (IS_PARTITIONED(hctl))
		SpinLockRelease(&hctl->freeList[freelist_idx].mutex);

	return true;
}

五、结构图

在这里插入图片描述

六、分配

src/backend/storage/buffer/bufmgr.c

static BufferDesc *
BufferAlloc(SMgrRelation smgr, char relpersistence, ForkNumber forkNum,
			BlockNumber blockNum,
			BufferAccessStrategy strategy,
			bool *foundPtr){
    
...
}

6.1 根据BufferTag计算hash值

	/* create a tag so we can lookup the buffer */
	INIT_BUFFERTAG(newTag, smgr->smgr_rnode.node, forkNum, blockNum);
	
	newHash = BufTableHashCode(&newTag);

6.2 hash表中查找

	buf_id = BufTableLookup(&newTag, newHash);

6.3 没有找到，分配新的一个

for (;;)
	{
    
	...
		buf = StrategyGetBuffer(strategy, &buf_state);
	...
}

BufferDesc *
StrategyGetBuffer(BufferAccessStrategy strategy, uint32 *buf_state)
{
    
	BufferDesc *buf;
	......
	pg_atomic_fetch_add_u32(&StrategyControl->numBufferAllocs, 1);
	...
	if (StrategyControl->firstFreeBuffer >= 0)
	{
    
		while (true)
		{
    
			...
			if (StrategyControl->firstFreeBuffer < 0)
			{
    
				...
				break;
			}

			buf = GetBufferDescriptor(StrategyControl->firstFreeBuffer);

			/* Unconditionally remove buffer from freelist */
			StrategyControl->firstFreeBuffer = buf->freeNext;
			buf->freeNext = FREENEXT_NOT_IN_LIST;

			...
				return buf;
			...
		}
	}
	....
}