[make a boat diary] [shapr3d STL format to gcode]

Make ship records

I originally used a simple top cover , Apply a layer of glue gun and several layers of adhesive tape , Seal the top of the boat . After testing , Got some water （ I think I sealed it ）, Also encountered a ship out of control 、 In situ rotation , At first, I thought it was just because the remote control broke .
After the second day of adjustment , I didn't know until I was tested in the water ：（ Theory and practice are really much worse , There are many possible reasons for the problems , Do more , Accumulate experience , Improve yourself ！！！）
1、 The ship is out of control 、 Spin around because the remote control battery is dead .
2、 The boat got into the water because , This hull was left by the former graduate student . The screws of the original hull have aged , There may be cracks , Cause water seepage .

Because the opening and closing of the original hatch is very inconvenient , Not very waterproof . So I'm going to draw a 3D structure , Print out a structure , The drawing is as follows ：（ There are two hatches , One to check the situation of raspberry pie , Another one is to check the condition of the battery . I'll print one here first , Give it a try first , Our printers can only be used one by one ）

Remember to choose STL Format , Then use the corresponding software to convert it into a format that the printer can recognize （ It varies according to the brand of the printer ）. In our lab 3D The printer is HORI Brand , So the software I use is HoriPrinterSoft

Shapr3D Of STL Format conversion Gcode

1、 The first STL Format file loaded

2、 The printer model should be selected correctly

3、 Click on Layered slice

4、 Remember to slice settings

5、 Export directly , Download to SDM Cary can print .

Be careful ： You can adjust the size by scrolling with the mouse . Don't make mistakes .

Last ,yue The luckier you try , come on. ！！！