[SketchUp 2021] sketch master's image output and rendering style description [edge setting, plane setting, background setting, watermark setting, modeling setting, sky background creating sky, creatin

side line - Plane - Background modification description

• The reason why we just say this now , yes Because if we made these changes , May create unnecessary loads on the computer , In modeling , It's going to get stuck .
  So after we have created what needs to be modeled , It is good to modify it when outputting ...

• I use the following simulation scenario to illustrate
  

style

• Open the style defaults panel
  

choice

• The software brings us the following functions 【 Before adjustment, it is best to record what style is used now , Otherwise, it is not impossible to change back to the original effect 】
  
• Now let's try switching a few
  For example, I am now ready to change to hand drawn lines , The following is before modification
  
  After modification, it becomes like this
  
  Change again
  
  Change again
  
  Change again ... And so on
  
• Switch back to the original effect , Then click on the first one in the model 【 At the beginning, I talked about the effect of using records by default 】
  

edit

• There are several modules , Say it separately
  

Sideline settings

• The icons are as follows
  This boundary setting can control the color of our geometry boundary 、 thickness 、 Show and hide status .
  
• Such as , I canceled the sideline , Then there is no boundary in the scene
  
• Rear edge line , As I said before , Is to show the edge of the hidden part 【 Show occluded edges as dashed lines 】
  
• Contour line , In fact, the side line is bold
  Did not open
  
  Turn on , I made it 5, So it's obvious
  
• Deep thick lines ： It is mainly used to emphasize that the foreground line of the object in our scene is stronger than the background line 【 It is similar to the effect of "near reality and far emptiness" when we draw a sketch 】, The embodiment is that the closer to our viewport, the stronger the telescopic line , On the contrary, the weaker .【 Not much use 】
  
• Head start ： Is that the end of the line will exceed a part 【 That is, each line segment will extend a little 】, Here's the picture .
  
• Endpoint ： Just make it a little thicker at the end , Here's the picture
  
• shake ： After opening , The line will be offset by that point , Simulate the effect of hand drawing ？
  The following is unopened
  
  After opening
  
• Short horizontal ： This is used in conjunction with jitter , If jitter is not turned on , This has no effect , So what is the specific function , The following closes you and the above figure to see the difference 【 I can't seem to see , You can see the difference when you order , Feel for yourself 】.
  
• At the bottom, there are a few things modified according to the color , This is the mode adjustment .
  
  If all the above are the same , I changed black to another color 【 This mode is usually used 】
  
  Display by material , If you can see the sideline, you can't see it , Because the materials are the same 【 This is equivalent to displaying by material color 】
  

By axis , Is where the edge line will be displayed xzy The color of

Plane settings

• The icons are as follows
  This mainly controls the color of the front and back , And display mode and transparency .
  
• Adjusting the front and back colors is not an example .
  The following style icons , When we talked about the style, we said , I also pulled the style tool for comparison , It's the same thing
  as follows , I adjust to monochrome mode , Just show the front and back 【 This rendering is very useful , Before output, you should also use this monochrome mode to see the effect 】
  

Background setting

• background , Is the color in the distance , I won't change it .
  
• sky
  This place in the distance is the sky
  
  I shut the sky , Only the background is left
  
• ground , The default is not on , Generally, it can be kept closed 【 Do not change the transparency parameter after it is enabled , Otherwise, the computer will be stuck 】, After opening the ground , It covers the background 【 That is to say, the background has no effect at this time 】
  
  After the ground display is ticked , You can see the sky even from below
  
  If you cancel , What you see is the background
  

Watermark settings

• The icons are as follows
  The watermark function can be used to label our images , Used to place two-dimensional images .
  notes ： Make sure the following display watermark is , Functions can be displayed or used normally .
  

• Create watermark
  Find an icon and open it
  
  Then a box will pop up , Name customization , The background is the picture under the model , Overlay is the picture on the model
  
  If I choose to overwrite , The following mix , In fact, it is transparency adjustment , Can preview the effect in real time . Templates are generally created without , I won't talk about it .
  
  Move on to the next step , This is to adjust the storage location , If I put it in the lower left corner , The following scale is actually the image size .
  
  After that, there will always be a watermark in the lower right corner 【 In fact, this kind of fixed watermark , It is best to be completely opaque , I am the default translucent 】
  

• Of course , Dissatisfied with the existing watermark , Once it's created , It can be modified
  Select watermark , Click Settings
  
  If I change the name of the picture , Then change to complete opacity , Position the same
  
  Click OK , The modification is completed
  

• I created the overlay before , The effect is as follows , It will cover the model
  
  If I want to change what I have already created to that , background , If not covered
  Select the watermark directly , Click move down
  
  Then the watermark goes under the model space , This becomes the background 【 So if the watermark is above the model space , It means covering 】
  

• Hide watermark
  As I said before , Watermarks should be made √ Function can be used normally , So we want to hide , Put... Directly √ Just get rid of it
  

• To delete is to create next to it
  Select watermark , Click on - Just fine
  

• Watermark output
  Sometimes resources downloaded from the Internet will have this watermark , We can use this when we want to save the watermark separately
  Right click the watermark directly , Output is good
  

Modeling settings

• The icons are as follows
  

• Here we can adjust the selected style of the object 【 For example, the color of the selected object , The color of the object being locked, etc 】
  The color of the selected item is the color that appears when the mouse clicks on the object
  
  The locked color is - Right click - The color displayed after locking 【 Locked items will not be modified 】
  
  Don't say the , Anyway, these colors mean literally . Set the handle as required

• The following functions are also literally , Not one by one
  If checked, it means that , On the contrary, it is not enabled .
  

Mix up

• You can understand this as displaying the icons and functions of each setting in the above editing , It doesn't work .
  

Example 【 Create a sky with colors and watermarks 】

Sky background create sky

• If I now give this sky a simulation of what , The effect of dusk
  
• Go to edit - Background setting
  
  Define the color of the sky
  Dusk , It's orange 【 You can use my rng Color number , You can also customize it 】
  
  Then click OK
  The twilight effect has a race
  
• Empathy , If I imitate the blue sky
  Find a favorite blue sky color
  
  Click OK , The color of the sky
  

Create a sky with a watermark background

• This is the use of watermarks , First add a sky background picture
  
• Select background next
  
• Adjust to the appropriate transparency next
  
• Because now the stretch ratio is locked , So the sky doesn't cover the whole screen
  
  So we need to cancel the lock image aspect ratio √, Then select the stretching form for the picture , Click finish
  
  When you click finish , The sky is finished 【 Before this pen, the sky was made in the form of a semicircle , It's so much better .】