EN 438-7 laminated sheet products for building covering decoration - CE certification

With the development of electrical industry , High insulation . High strength 、 Lamination resistant to high temperature and suitable for various use environments Plastic One after another .

 

High pressure laminates for decoration CE authentication （ EU compulsory certification ）－ brief introduction

In the EU market “CE” The mark is a compulsory certification mark , To show that the product complies with the EU 《 New methods of technical coordination and Standardization 》 The basic requirements of the directive . This is a mandatory requirement of EU law on products .

Paste on the decorative high-pressure laminate CE The logo can not only prove that its products comply with the building products directive （CPR 305/2011/EU） And related standards （ Harmonized European standards EN 438-7） Prescribed safety , Environmental protection , Health and consumer protection . And it can reasonably avoid technical barriers to trade , Sell freely in the European market and open up other international markets .

notes ： EU building regulations CPR（Construction Product Regulation） 305/2011/EU Fully replace the EU construction products directive CPD(Construction Product Directive) 106/89/EEC, And from 2013 year 7 month 1 Enforcement from

EN 438-7 The product standard name of high-pressure laminate for decoration is ：

EN 438-7:2005 High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Compact laminate and HPL composite panels for internal and external wall and ceiling finishes

EN 438-7-2005 High pressure laminates for decoration (HPL). Sheet based on thermosetting resin ( Commonly referred to as laminates ). Interior wall 、 Compact laminates and for external wall and ceiling finishes HPL Composite plate

Want to get decorative high-pressure laminates CE Certification requires compliance with the product directive ： Building product regulations CPR(Construction Product Regulation) 305/2011/EU, as well as , Harmonized European standards ：BS EN 438-7

 EN 438-7 High pressure laminates for decoration CE The product range involved in the certification ：

EN 438 This part of stipulates section 3 Test method for determining the properties of high-pressure decorative laminates as defined in . These methods are mainly used to test EN 438-3、4、5 and 6 Plates specified in .

The surface appearance of the laminate should be checked under standardized lighting and observation conditions

High pressure laminates for decoration CE authentication － The certification process ：

1、 Determine the type of product to be certified , Application for submission

2、 Determine the European product directive , Decorative high-pressure laminates need to comply with the new EU building products regulations CPR 305/2011/EU

3、 Determination of harmonized European standards , Decorative high-pressure laminates need to meet Harmonized Standards EN 438-7

4、 according to CPR Directives and harmonized standards EN 438-7 Test and evaluate , EU notified certification bodies according to the certification system 3 Conduct test certification

5、 Obtain test reports and certificates issued by EU notified bodies

6、 Issue product performance statement (Declaration of Performance)

7、 The product package is pasted with the code of the notified body CE sign

8、 Sell freely in the European market

come from JJ2022