Huawei equipment is configured with small network WLAN basic services

1. To configure LSW1 and AC1, send AP1 And AC1 Can transmit between CAPWAP message
   [LSW1]vlan batch 100
   [LSW1-GigabitEthernet0/0/1]port link-type trunk
   [LSW1-GigabitEthernet0/0/1]port trunk allow-pass vlan 100
   [LSW1-GigabitEthernet0/0/2]port link-type trunk
   [LSW1-GigabitEthernet0/0/2]port trunk allow-pass vlan 100
   [LSW1-GigabitEthernet0/0/2]port trunk pvid vlan 100
   [AC1]vlan 100
   [AC1-GigabitEthernet0/0/1]port link-type trunk
   [AC1-GigabitEthernet0/0/1]port trunk allow-pass vlan 100

2. To configure AC1 Interworking with the upper network equipment : Uplink interface GE0/0/2 Join in VLAN101（ Business VLAN）
   [AC1]vlan 101
   [AC1-GigabitEthernet0/0/2]port link-type trunk
   [AC1-GigabitEthernet0/0/2]port trunk allow-pass vlan 101

3. To configure AC1 As DHCP The server , by STA1 and AP1 Distribute IP Address ： Configure interface address pool based DHCP The server , among ,VLANIF100 Interface for AP1 Provide IP Address ,VLANIF101 by STA Provide IP Address
   [AC1]int Vlanif 100
   [AC1-Vlanif100]ip add 10.1.1.1 24
   [AC1-Vlanif100]dhcp select interface
   [AC1]int Vlanif 101
   [AC1-Vlanif101]ip add 10.1.2.1 24
   [AC1-Vlanif101]dhcp select interface

4. To configure AP go online
   [AC1]wlan
   [AC1-wlan-view]ap-group name ap-g1 // establish AP Group , For the same configuration AP All join the same AP In the group
   [AC1-wlan-view]regulatory-domain-profile name domain1 // Create domain management template
   [AC1-wlan-regulate-domain-domain1]country-code cn // To configure AC My country code
   [AC1-wlan-view]ap-group name ap-g1
   [AC1-wlan-ap-group-ap-g1]regulatory-domain-profile domain1 //AP Reference domain management template under group
   [AC1]capwap source interface Vlanif 100 // To configure AC Source interface of
   [AC1]wlan
   [AC1-wlan-view]ap auth-mode mac-auth // Default authentication , It can be omitted
   [AC1-wlan-view]ap-id 0 ap-mac 00e0-fc5d-32c0 // Offline import AP
   [AC1-wlan-ap-0]ap-name ap1 // by AP Configuration name
   [AC1-wlan-ap-0]ap-group ap-g1 // take AP Join in AP Group
   

5. To configure WLAN Business parameters
   [AC1-wlan-view]security-profile name wlan-sec // Create a security template
   [AC1-wlan-sec-prof-wlan-sec]security wpa2 psk pass-phrase [email protected] aes // Configure security policy WPA2+PSK+AES
   [AC1-wlan-view]ssid-profile name wlan-ssid // Create a SSID Templates
   [AC1-wlan-ssid-prof-wlan-ssid]ssid wlan-net // To configure SSID name
   [AC1-wlan-view]vap-profile name wlan-vap // establish VAP Templates
   [AC1-wlan-vap-prof-wlan-vap]forward-mode tunnel // Configure business data forwarding mode
   [AC1-wlan-vap-prof-wlan-vap]service-vlan vlan-id 101 // Configure business VLAN
   [AC1-wlan-vap-prof-wlan-vap]security-profile wlan-sec // Reference security template
   [AC1-wlan-vap-prof-wlan-vap]ssid-profile wlan-ssid // quote SSID Templates
   [AC1-wlan-view]ap-group name ap-g1
   [AC1-wlan-ap-group-ap-g1]vap-profile wlan-vap wlan 1 radio all // To configure AP Group reference VAP Templates ,AP RF on 0 And RF 1 All use VAP Templates “wlan-vap” Configuration of

6. To configure AP RF channel and power
   [AC1-wlan-ap-0]radio 0
   [AC1-wlan-radio-0/0]channel 20mhz 6
   [AC1-wlan-radio-0/0]eirp 127
   [AC1-wlan-ap-0]radio 1
   [AC1-wlan-radio-0/1]channel 20mhz 149
   [AC1-wlan-radio-0/1]eirp 127

7. Verify configuration