De4000h storage installation configuration

1. Configure the storage server

a. Open the box and connect to the server control network port

When you get the server , First install the built-in documentation to connect ,

Let's take a look at the interface on the back of the server , Server points A、B Two controllers , Either of these two controllers can be connected , Here I choose to connect A controller , Then according to the label in the figure above 2 Position shown , We connect P1 The port acts as a control network port . In the figure above, the main label is required 1 Shown , Depending on the firmware version , The server has different defaults IP Address . My server P1 Network port default IP The address is 169.254.128.101, Put my host IP Address set to 169.254.128.100.

The server and Windows Host network cable connection , The indicator flashes correctly ,ping once .