How can fluke dsx2-5000 and dsx2-8000 modules find the calibration expiration date?

Some friends are using DSX2-5000 perhaps DSX2-8000 I don't know whether the machine has expired ？

Fluke Versiv Series cable certification tester to ensure that the module works within the specified accuracy index range , Fluke network recommends every 12 Months , Need to put DSX Series cable certification tester module （DSX2-8000 or DSX2-5000） Send it to the certification service center for factory calibration . Note that this refers to the backplane module , Plug it into the back and top of the device , Part with adapter interface . With display screen or key 、 The indicator light is Versiv platform , It provides an operating platform 、 Functions such as storage and power supply , Without test circuit , So they don't need calibration .
01 Use the device to view
You can insert modules Versiv host , And look at “Version Information”( Version information ), Query this module . The module should be on the calibration date shown or the calibration start date 12 The original factory calibration will be carried out after months .
In the attached module “Home”( Home page ) On the screen , Touch “TOOLS > Version Information”( Tools > Version information )

Next , Touch “Module”( modular ) . The first time you use a module to perform a test , The second calibration date will be displayed ： explain ：

MAIN( host ) The screen MODULE( modular ) The software and hardware versions on are the same as MAIN TESTER( Host tester ) It is normal that the software and hardware versions on the screen do not match , Even after the software is updated . Just update when new updates are available Versiv The host and Versiv Remote unit , Any measurement module will be automatically updated when connected to the tester . The above example does not mean DSX-5000 Module needs to be updated .
to update Versiv The host and Versiv Remote unit , Any measurement module will be automatically updated when connected to the tester . The above example does not mean DSX-5000 Module needs to be updated .
02 LinkWare PC
Through USB During the import process of downloading results from the tester ,LinkWare PC Before the calibration expires 60 Days and 45 Days send warning messages . Before calibration expires 30 Days. ,LinkWare PC A warning dialog box will pop up every time you import data from the tester .