2022 driller (drilling) examination question bank and simulation examination

Source of question bank ： Safety production simulation test, a little public official account.

2022 Driller （ well drilling ） The examination question is driller （ well drilling ） Training test questions new textbook outline question bank ！2022 Driller （ well drilling ） Examination question bank and mock examination are based on driller （ well drilling ） The new exam Syllabus . Driller （ well drilling ） The simulated examination question bank can pass the simulated examination of safety production at one point .

1、【 Single topic selection 】ZJ70D The maximum hook load of the drill is ( )kN.（ A ）

A、4500

B、3200

C、3000

2、【 Single topic selection 】ZJ70D The maximum drill string weight of the drill is ( )kN.（ B ）

A、2400

B、2200

C、2600

3、【 Single topic selection 】ZJ70D The area of the drill floor of the drilling rig is 13.935m×( )m.（ B ）

A、11

B、13

C、12

4、【 Single topic selection 】 Once the keyway is found , Take the initiative to break the keyway . That is, connect the keyway expander in the drill string . When the reaming is smooth , We should strictly control the downward speed , Cannot be greater than the ROP of the well section ( ).（ B ）

A、 A half

B、 One-third

C、 quarter

5、【 Single topic selection 】 Take the high side direction line as the starting edge , Rotate clockwise to the angle turned on the device direction line , Called a deflecting tool ( ).（ B ）

A、 Device azimuth

B、 Device angle

C、 azimuth

6、【 Single topic selection 】 The main reason for the failure of corporate culture ( ).（ C ）

A、 It's too hard to do

B、 It's not easy to fall to the ground

C、 incomprehension

7、【 Single topic selection 】 Underbalanced drilling with ordinary drilling fluid refers to ( ).（ A ）

A、 Flow drill

B、 Artificially induced underbalanced drilling

C、 Natural underbalanced drilling

8、【 Single topic selection 】 That is to make a correct diagnosis of those who have suffered from occupational diseases , Deal with in time , Including timely disengagement for treatment , Prevent deterioration and complications , Make it healthy . The above belongs to occupational disease prevention ( ).（ C ）

A、 The principle of primary prevention

B、 The principle of secondary prevention

C、 The principle of three-level prevention

9、【 Single topic selection 】 The main content of safety system engineering includes accident cause theory 、 System security analysis 、 Safety assessment 、 Security measures , Its core content is ( ).（ B ）

A、 Accident cause theory

B、 System security analysis

C、 Safety assessment

10、【 Single topic selection 】 Wait for the derrickman to buckle the elevator and send out the lifting signal , Lift up the column and take out the drill pipe box , Cooperate with the floormen . Send the column to the wellhead , Wait until the lower joint of the column is higher than the wellhead drilling tool joint ( )m When braking , Lower the column and buckle it successfully once .（ B ）

A、0.1 to 0.2

B、0.2 to 0.3

C、0.3 to 0.5

11、【 Single topic selection 】 The traveling mechanism of crane can usually be in ( ) rice ／ Safely operate to the position of the anchor pit for anchoring under the wind speed of seconds .（ B ）

A、28

B、25

C、30

12、【 Single topic selection 】 The transmission ratio of the final drive ( ).（ A ）

A、 Greater than 1

B、 Less than 1

C、 be equal to 1

D、 Less than 0

13、【 Single topic selection 】 The routine maintenance of the vehicle is ( ) Centered .（ B ）

A、 strong 、 adjustment

B、 cleaning 、 Check

C、 adjustment 、 Troubleshooting

14、【 Single topic selection 】 Undertake safety evaluation 、 authentication 、 testing 、 Inspection organization , Issue false certificates , Causing harm to others , Those who bear joint and several liability with production and business operation entities are ( ).（ C ）

A、 Main person in charge of the production and operation unit

B、 Head of intermediary organization

C、 Intermediary organizations

15、【 Single topic selection 】 Lift the casing male buckle away from the drill floor plane ( )m when , Remove the male buckle protector .（ A ）

A、0.5

B、1

C、2

16、【 Single topic selection 】 The normally closed Tong of hydraulic disc brake is safety gear , be used for ( ) The parking brake .（ B ）

A、 drilling

B、 Hang

C、 loop

17、【 Single topic selection 】《 Safety Law of the people's Republic of China on special equipment 》 Article 7 provides that , Production of special equipment 、 business 、 The user shall abide by this Law and other relevant laws 、 statute , establish 、 Improve the safety and management of special equipment ( ) Responsibility system .（ B ）

A、 change shifts

B、 Energy saving

C、 Maintenance

18、【 Single topic selection 】 Special operation personnel fail to extend the review beyond the validity period of special operation certificate , Examine the certificate issuing authority for special operation permit ( ).（ C ）

A、 Tips

B、 prohibit

C、 revoke

19、【 Single topic selection 】 The employer shall establish 、 Improve the prevention and treatment of occupational diseases ( ), Strengthen the management of occupational disease prevention , Improve the level of occupational disease prevention , Be responsible for the occupational disease hazards caused by the unit .（ C ）

A、 Institutions

B、 Rules and regulations

C、 responsibility system

20、【 Single topic selection 】 The main person in charge and occupational health management personnel of the employer shall accept ( ) train , Comply with occupational disease prevention laws 、 statute , Organize the occupational disease prevention and control work of the unit according to law .（ C ）

A、 technology

B、 Security

C、 Occupational Health

21、【 Single topic selection 】 When the forklift lever is operated in a fixed position ( ).（ B ）

A、 The distribution valve connects the rising oil circuit with the hydraulic pump 、 The top of the oil cylinder is connected with the oil tank , The pressure oil output by the oil pump fills the lower part of the oil cylinder through the rising oil circuit

B、 The distribution valve closes the upper and lower oil circuits , Connect the oil return circuit , The oil pressure at the upper and lower parts of the cylinder is balanced

C、 The distribution valve connects the oil circuit between the oil pump and the upper part of the oil cylinder and the oil circuit between the lower part of the oil cylinder and the oil tank at the same time

D、 The distribution valve connects the oil pump with the oil circuit of the oil tank and the oil circuit at the upper and lower parts of the oil cylinder at the same time

22、【 Single topic selection 】 When smashing the pin, the auxiliary operator shall stand in the exit direction of the pin ( ).（ C ）

A、 In front of the

B、 The rear

C、 Both sides

23、【 Single topic selection 】《 Safety Law of the people's Republic of China on special equipment 》 Regulations , Handle the use registration with the Department responsible for the safety supervision and management of special equipment , Obtain the use registration certificate .( ) It should be placed in a prominent position of the special equipment .（ C ）

A、 Use certificate

B、 Registration Certificate No

C、 Registration mark

D、 Name of registration authority

24、【 Single topic selection 】 The first interface is well cemented 、 The second interface is poorly cemented , On the acoustic variable density log, the casing wave and formation wave are weak , The strip is ( ).（ A ）

A、 Gray and white

B、 Black and white

C、 defect

25、【 Single topic selection 】 Occupational health survey , Can identify the existence of ( )、 Health hazards of infectious diseases .（ A ）

A、 Endemic Diseases

B、 Epidemic

C、 Genetic diseases

26、【 Single topic selection 】 Requiring relevant personnel to comply with is ( ).（ B ）

A、 Warning Sign

B、 Command flag

C、 Prompt sign

27、【 Single topic selection 】 Violate the law on administration 、 The regulations , But not yet constitute a crime , The legal consequences that should be borne according to law are ( ).（ B ）

A、 civil liability

B、 administrative responsibility

C、 Criminal liability

28、【 Single topic selection 】 The bit shall be inserted into the bit box by ( ).（ C ）

A、 Lift the guard wire

B、 Special drill bit threading

C、 artificial

29、【 Single topic selection 】 The bit is drilling in inclined layered strata , When drilling to the junction of each layer , The rock on the updip side of the formation is under the action of WOB ,( ).（ A ）

A、 Crushing occurs perpendicular to the layer

B、 Crushing occurs parallel to the direction of the layer

C、 Crushing occurs laterally in the direction of the layer

30、【 Single topic selection 】《 Safety Law of the people's Republic of China on special equipment 》 Regulations , Special equipment inspection 、 Testing organization and its inspection 、 The testing personnel shall be objective 、 justice 、 Issue inspection report in time 、 Test report , And test 、 Test results and ( ) be responsible for .（ C ）

A、 Evaluation results

B、 Inspection conclusion

C、 expert conclusion

31、【 Single topic selection 】 The technical measures for engineering control of occupational disease prevention do not include ( ).（ A ）

A、 Personal protective equipment

B、 Wet operation

C、 Local air supply

32、【 Multiple choice 】 The transmission system of electric forklift with centralized drive includes ( ).（ ABC ）

A、 main reducer

B、 differential mechanism

C、 Half shaft

D、 Drive the wheels

33、【 Single topic selection 】 Approximate calculation formula of allowable tensile force of steel wire rope :P=d2/10*（T）, among . Ann Whole life production Pass the mock exam at one point .d Express :( ).（ A ）

A、 Wire rope diameter , In English cents

B、 Wire rope diameter , In millimeters

C、 Wire rope radius , In English cents

D、 Wire rope radius , In millimeters

34、【 Single topic selection 】 Ignition of combustible substances ( ) It is called ignition point or ignition point .（ B ）

A、 Normal temperature

B、 Minimum temperature

C、 Humidity in the air

35、【 Single topic selection 】 The wrong thing about electric shock rescue is ( ).（ C ）

A、 First, get the person who gets an electric shock out of the power supply as soon as possible

B、 Timely rescue is very important

C、 The rescue should be sent to the hospital

D、 Rescue must be carried out on site

36、【 Multiple choice 】 Used by crane drivers “ Sound signal ” Yes :( ).（ ABC ）

A、 understand

B、 repeat

C、 Be careful

D、 get set

37、【 Single topic selection 】 When vehicles meet, they should do “ Comity three first ” That is, let 、 Slow first 、( ), And pay attention to non motor vehicles and pedestrians .（ B ）

A、 Whistle first

B、 Stop first

C、 First of all

38、【 Single topic selection 】 Driving , The driver gets information from his eyes and other sensory organs , Into the brain , After brain processing , An action resulting from a command , This period of time is called ( ).（ A ）

A、 Reflect time

B、 Action time

C、 Time to prepare

39、【 Multiple choice 】《 Management rules for the use of special equipment 》 Regulations ,（） Special equipment , Do not apply for use registration .（ ABCD ）

A、 Eliminated by the state ;

B、 Scrapped ;

C、 Not meeting the safety performance ;

D、 Those that do not meet the energy efficiency index .

40、【 Multiple choice 】 The reasons for the driver's accident are ( ).（ ABC ）

A、 Unskilled in technique

B、 Emotional instability

C、 The car is not in good shape

41、【 Multiple choice 】《 Safety Law of the people's Republic of China on special equipment 》 Article 84 provides that , The special equipment of the unit using the special equipment has serious potential accidents , No modification 、 Repair value , Or meet other scrapping conditions specified in safety technical specifications , Failure to fulfill the scrapping obligation according to law , And go through the cancellation procedures of the use registration certificate . Order to stop using relevant special equipment , It's about ( ) above ( ) The following fines .（ BC ）

A、 Two thousand yuan

B、 Thirty thousand yuan

C、 Three hundred thousand yuan

D、 200000 yuan

42、【 Multiple choice 】 The technical parameters indicating the passing performance of the vehicle are ：( )（ BCD ）

A、 Turning radius

B、 Approach angle

C、 Departure angle

D、 Minimum ground clearance

43、【 Single topic selection 】 The steering gear is in the steering system ( ) device .（ C ）

A、 Slow down

B、 Increase torsion

C、 Reduce speed and increase torque

44、【 Multiple choice 】 The electric power in the crane will do harm to people ：( ).（ AB ）

A、 Get an electric shock

B、 Electric spark burn

C、 Bruise

D、 Crush injury

45、【 Multiple choice 】《 Production safety law of the people's Republic of China 》 The specific date of adoption and implementation is ( ).（ AC ）

A、2002 year 6 month 29 Passed by

B、2001 year 6 month 29 Passed by

C、2002 year 11 month 1 In force on

D、2002 year 10 month 1 In force on

46、【 Single topic selection 】 The range between the lower explosion limit and the upper explosion limit is called ( ).（ C ）

A、 The explosion

B、 Explosion concentration

C、 Explosion limit .

47、【 Single topic selection 】 The gear oil can effectively make the lubricating oil film adsorb between the moving lubricating surfaces , It has the property of reducing friction , Called gear oil （）.（ C ）

A、 Extreme pressure and wear resistance

B、 Low temperature fluidity

C、 Oiliness

48、【 Multiple choice 】 The management of emergency plan includes （）.（ ABCD ）

A、 Review and release

B、 Keep on record

C、 rehearse

D、 Publicity, education and training and revision

49、【 Multiple choice 】《 Special equipment safety law 》 Regulations , Production of special equipment 、 business 、 User （） Be seized 、 Seizure of special equipment or its main parts , Order correction , Impose a fine of not less than 50000 yuan but not more than 200000 yuan ; serious , Revocation of production license , Cancel the registration certificate for the use of special equipment .（ ABDE ）

A、 Use... Without authorization

B、 Exchange

C、 hide

D、 Transfer

E、 Damage

50、【 Judgment questions 】 Never press hard when running in the hole is blocked , If you find that the resistance increases a lot when lifting , Don't press blindly , Instead, circulate the drilling fluid immediately , Ream down , Eliminate resistance .（ √ ）

51、【 Judgment questions 】《 Safety Law of the people's Republic of China on special equipment 》 Regulations ： Special equipment safety management personnel 、 Testing personnel and operators shall obtain corresponding qualifications in accordance with the relevant provisions of the state , Before engaging in relevant work .（ √ ）

52、【 Judgment questions 】 In plant machine ’ Safety production mold I plan to pass the exam at one point ’ Installation of mobile vehicles 、 Maintenance 、 The transformation business shall not be subcontracted or subcontracted in any form .（ √ ）

53、【 Judgment questions 】 Each well in the cluster well group is a directional well .（ × ）

54、【 Judgment questions 】 The method of jacking and starting the vehicle can be used .（ × ）

55、【 Judgment questions 】 Enterprise vision is the future blueprint of enterprise development , It was formulated by the senior leaders of the enterprise , It has little relationship with grass-roots employees .（ × ）

56、【 Judgment questions 】 The actions of various mechanisms are uncoordinated during operation , The accident that causes the crane to collide with other obstacles .（ √ ）

57、【 Judgment questions 】 In pressurized conventional coring tools , The core claw is placed at the lowest part of the outer barrel assembly .（ × ）

58、【 Judgment questions 】 Don't panic when in danger , Muddleheaded to make evasive actions , Although it can stop in time after the accident , But often losses have occurred .（ √ ）

59、【 Judgment questions 】 Shifting gears should usually be carried out step by step , Do not overstep the gear .（ √ ）

60、【 Judgment questions 】 In pressurized conventional coring tools , The core barrel is composed of inner barrel and outer barrel , The outer barrel includes the outer core barrel and suspension assembly .（ × ）

61、【 Judgment questions 】 Hazard identification is mainly to find the root cause or state of the surrounding and a series of processes in the operation , May cause people ‘ Safety production simulation Pass the exam at one o'clock ‘ Member injury 、 Environmental damage and property loss .（ √ ）

62、【 Judgment questions 】 After unloading the drill , Brush the drill thread clean , And apply thread grease .（ √ ）

63、【 Judgment questions 】 When the forklift inserts and takes the goods , The horizontal section of the fork is used to insert the bottom of the cargo or pallet , Therefore, the upper surface of the horizontal section of the fork must be horizontal .（）（ √ ）

64、【 Judgment questions 】 As long as the distance is far , Workshop for dangerous goods 、 The store 、 The warehouse can be in the same building as the staff dormitory .（ × ）

65、【 Judgment questions 】 Drivers use unsafe parking cars , Make it unsafe .（）（ √ ）

66、【 Judgment questions 】 Engaged in the transportation of dangerous goods 、 Stevedores , Safety education shall be conducted once a quarter , The training examination is conducted every four years , The operation can be continued only after passing the examination .（ √ ）

67、【 Judgment questions 】 Gasoline engine has ignition system , The diesel engine has no ignition system .（ √ ）

68、【 Judgment questions 】 The state has a strict control over processes that seriously endanger production safety 、 Equipment shall be eliminated .（ √ ）

69、【 Judgment questions 】 Bonuses are not an incentive .（ × ）

70、【 Judgment questions 】 In order to ensure uniform stress on the cylinder head , No air leakage 、 Leakage, etc , The tightening sequence and tightening torque of cylinder head bolts of internal combustion engine are strictly regulated .（ √ ）

71、【 Judgment questions 】 Check the lifting rings regularly 、 Lifting eye pin 、 Ring seat 、 All stress areas of hook body , If cracks are found, stop using immediately .（ √ ）

72、【 Judgment questions 】 For the leakage layer of fractured oil and gas reservoir , It is strictly forbidden to block , It is necessary to test to obtain leakage layer data .（ √ ）

73、【 Judgment questions 】 Dozing off while driving will greatly reduce the driver's vision , Various obstacles cannot be found in advance , When it is serious, it will make the vehicle deviate from the road , A major accident happened .（ √ ）

74、【 Judgment questions 】 Electric vehicle vibration 、 The noise and environmental pollution are lower than those of diesel vehicles .（ √ ）

75、【 Judgment questions 】 The tool face refers to the bending direction of the deviation drilling tool .（ √ ）

76、【 Judgment questions 】 China stipulates the effective value of power frequency current 42、36、24、12 and 6V Is the rated value of safety voltage . If the electrical equipment in the well pad adopts 24V Above safe voltage , Protective measures for direct contact with electric shock are not required .（ × ）

77、【 Judgment questions 】 The braking interlocking device of storage battery vehicle shall be complete and reliable , When braking , The interlock switch must cut off the power supply of the traveling motor .（ √ ）

78、【 Judgment questions 】 The mechanical belt brake is connected to the adjusting sleeve through the adjusting screw 、 Spring 、 Convex concave pad , The adjusting sleeve prevents the impact force generated during braking .（ × ）

79、【 Judgment questions 】 Proper avoidance depends on driving ’ most New analysis ’ Drivers have good psychological quality and skilled driving skills .（ √ ）

80、【 Judgment questions 】 In case of danger, you should first look after people and then things , This is a basic principle of avoidance .（ √ ）

81、【 Judgment questions 】 When the production casing is run and circulated , Well flushing fluid should be treated , Make its viscosity at 48～53s Inside , The thickness of mud cake shall not be greater than 1mm.（ √ ）

82、【 Judgment questions 】 Mechanical parking equipment buffer refers to the absorption of kinetic energy , A device for mitigating impact .（ √ ）

83、【 Judgment questions 】 The production and business operation entities shall have the necessary capital investment to meet the conditions for safe production .（ √ ）

84、【 Judgment questions 】《 Safety Law of the people's Republic of China on special equipment 》 Regulations , Production of special equipment 、 business 、 The use unit produces 、 business 、 The special equipment used shall be self inspected and maintained .（ × ）

85、【 Judgment questions 】 A motor vehicle traveling in the same direction , The distance between the front and rear vehicles shall be determined according to the driving speed of the vehicles on the site 、 Pavement and climate conditions , Keep a distance where you can stop at any time .（）（ √ ）

86、【 Judgment questions 】 Forklift truck “ Safety production simulation test 1 Diantong “ When driving, you should try to reduce the turning radius to facilitate driving safety .（ × ）

87、【 Judgment questions 】 Production and business premises and staff dormitories shall be equipped with facilities that meet the requirements of emergency evacuation 、 The sign is obvious 、 Keep the exit clear .（ √ ）

88、【 Judgment questions 】 Lowering the center of gravity of the equipment can increase the stability of the surface supported object .（ √ ）

89、【 Judgment questions 】 The pipe rack and fittings shall be arranged neatly , No more than 3 Layer discharge .（ √ ）

90、【 Judgment questions 】 When using a set of wire rope clamps , Use at least two rope clamps .（ × ）

91、【 Judgment questions 】 Employees who suffer from accident injury or occupational disease due to work shall be treated , Enjoy medical treatment for work-related injuries .（ √ ）

92、【 Judgment questions 】 It is an obligation of special equipment users to do a good job of maintenance and regular inspection , It is also an important means to improve the service life of the equipment .（ √ ）

93、【 Judgment questions 】《 Safety Law of the people's Republic of China on special equipment 》 Regulations , Production of special equipment 、 business 、 The user and its main person in charge shall be responsible for its production 、 business 、 Be responsible for the safety of special equipment used .（ √ ）

94、【 Judgment questions 】 When driving a car , The driver can be barefoot or bareback .（ × ）

95、【 Judgment questions 】 During lifting operation , The use of balance beam can improve the lifting height .（ √ ）

96、【 Judgment questions 】 The self-locking conventional coring tool is blocked in running , The drilling tool can be moved up and down 、 Circulating drilling fluid , Ream if necessary .（ × ）

97、【 Judgment questions 】 Choosing a well profile with high friction is the primary problem in drilling extended reach wells .（ × ）

98、【 Judgment questions 】 Partial cementation is shown as : Both casing wave and formation wave show medium intensity , The left side is a straight gray and white strip , On the right is a gray and white swing strip .（ √ ）

99、【 Judgment questions 】 Drill pipe is the main tool in rotary drilling . It is made of seamless steel pipe , Connected between drill collar and Kelly .（ √ ）

100、【 Judgment questions 】 Preventive measures are technical measures taken to avoid harm to the personal safety of employees caused by dangerous and hazardous factors 、 Operational measures .（ √ ）

Support precision drillers in all regions of the country （ Drilling operation ） Examination questions , Support safety certificate , Special operation certificate , Exercises on the question bank of vocational skill appraisal and other types of work .