当前位置:网站首页>Ag9310 same function alternative | cs5261 replaces ag9310type-c to HDMI single switch screen alternative | low BOM replaces ag9310 design

Ag9310 same function alternative | cs5261 replaces ag9310type-c to HDMI single switch screen alternative | low BOM replaces ag9310 design

2022-07-08 01:11:00 qq1659747718

AG9310 Same function alternative |CS5261 replace AG9310Type-C turn HDMI Single switch screen scheme | low BOM replace AG9310 Design
Capstone CS5261 It can completely replace and be compatible with functions AG9310, Not only can Type-C turn HDMI 4K30HZ Single turn design , It can also be replaced with the same function on some slow charging dock products AG9310, Let's talk about that in more detail CS5261 And AG9310 Function overview and parameter differences , And low BOM Advantages of cost substitution .
AG9310 Function Overview
AG9310 It's a realization USB Type-C turn HDMI Data converter . Support USB Type-C Show port override mode ,AG9310 You can stream video and audio from USB Type-C Interface to HDMI port . stay AG9310 in , Support 1 road 、2 road @1.62Gbps、2.7Gbps and 5.4Gbps Different configuration of frequency input ,HDMI Support [email protected] Output . Product manufacturers can use AG9310 Applications are easy to implement Type-C turn HDMI Data converter transfer .
CS5261 Function Overview
CS5261 Integrated DP1.4 Compatible receiver , One HDMI2.0b Compatible transmitter . Besides , It also includes two CC controller , be used for CC signal communication , In order to realize the DP Alt Mode and power transmission (5V Slow charging ) function , One for upstream TYPEC port , The other is for the downstream port .DP Interface includes 2 Main channel 、 Auxiliary channels and HPD The signal . The receiver supports a maximum of 5.4Gbps(HBR2) Data rate .DP The receiver contains HDCP1.4 Content protection scheme with embedded key , For the secure transmission of digital audio and video content .
To sum up :
CS5261 And AG9310 As a standard USB type CTM Display Port Alt Mode receiver , It consists of two main chains

The difference is right , An auxiliary channel differential pair , Two channel differential pair , Be able to operate HBR2(5.4-Gbps)、HBR(2.7-Gbps) and RBR(1.62-Gbps) Data rate , For HD uncompressed video transmission . The main link fully conforms to Display Port TM v1.4 standard .HDMI The link speed of each channel at the output is up to 3 Gbps, Allow to use 30Hz Refresh rate and 8 Bit color depth display 3840x 2160.

CS5261 And AG9310 Detailed parameter comparison :

CS5261 Parameter properties :

USB Type-C BC1.2 standard

VESA Display port TM(DP)v1.4 Compatible receiver

HDMI standard v2.0b Compatible transmitter , The data rate is as high as 3-Gbps.

Support all USB Type-C Channel configuration (CC)

USB Type-C Channel configuration (CC) function

Support hot plug detection (HPD)

HDMI Digital output

HDMI 2.0b compatible

The maximum data rate per channel is up to 3-Gbps

Support as much as 3840 [email protected] or [email protected]

AG9310 Parameter properties :

The embedded 16 position MCU

AG9310 Support EDID and MCC Straight through

Support hot plug detection

AG9310 Support the outside SPI Flash firmware upgrade

Support embedded HDCP 1.4

1.2V Core power and 3.3V I/O Power Supply

The embedded 5V/1.2V High efficiency regulator

At the same time, it shows the pass HDMI Output

2KV ESD performance

Support downlink spread spectrum clock (SSC)

AG9310 and CS5261 Pin configuration , And design structure block diagram :
 Insert picture description here
Upper figure CS5261 Pin configuration
 Insert picture description here
Above, AG9310 Pin configuration
 Insert picture description here
CS5261 Design structure block diagram
 Insert picture description here
AG9310 Design structure block diagram

CS5261 Design schematic diagram and AG9310 Design schematic diagram reference comparison :
 Insert picture description here  Insert picture description here
 Insert picture description here
Above, CS5261 Design circuit schematic diagram

 Insert picture description here
Above, AG9310 Schematic diagram of design circuit

To sum up :
CS5261 Not only can it completely replace AG9310, And the whole chip BOM Cost ratio AG9310 Be low , Designing circuits is also simple and easy , Chip integration ratio AG9310 higher , It mainly has the following advantages :

1. Embedded oscillator , No external crystals are required , Reduce the board frame and save devices , cost reduction .

2. The embedded MCU And Serial flash, It can be updated online at any time FW, Compatible with more devices : mobile phone , The computer 、 Plate etc. .

3. The embedded EDID( If the terminal device does not ,CS5261 Will respond EDID), The screen display is stable without delay .

 Insert picture description here

原网站

版权声明
本文为[qq1659747718]所创,转载请带上原文链接,感谢
https://yzsam.com/2022/02/202202130549081887.html