当前位置:网站首页>yate. conf
yate. conf
2022-07-05 23:20:00 【Full stack programmer webmaster】
Hello everyone , I meet you again , I'm the king of the whole stack
But files . Paste the following example . Don't explain ! Removal is very flexible ! Only keep sip Telephone !
[general]
; General settings for the operation of Yate
; modload: boolean: Should a module be loaded by default if there is no
; reference to it in the [modules] section
modload=disable
; modpath: string: Overrides the runtime module directory path which is
; compiled in or specified with the -m command line option. Note that this
; setting takes priority over anything else
; Note that you MUST NOT add a path separator at the end
;modpath=
; extrapath: string: Relative path to an extra modules directory, gets loaded
; before those added by command line -x parameters
; Note that you MUST NOT add a path separator at the end
;extrapath=
; nodename: string: Name of this node in a cluster
;nodename=
; maxworkers: int: Maximum number of worker threads the engine can create
;maxworkers=10
; maxevents: int: Maximum number of events kept per type
;maxevents=25
; startevents: boolean: Capture all debug events at startup
;startevents=yes
; restarts: int: Time in seconds after startup the engine will try to restart
; to clean up any accumulating problems. Restarts are performed only when
; started in supervised mode
; If at restart time at least one of the modules is busy it will try again to
; restart every 10 seconds
;restarts=0
; warntime: int: Warn time limit for message dispatch in milliseconds, a value
; of zero disables such warnings
;warntime=0
; idlemsec: int: System idle time in milliseconds
; Set to zero to use platform default
; If not set the platform default is doubled only in client mode
;idlemsec=
; wintimer: int: Requested timer resolution in milliseconds (Windows only, does
; not work on 9x and ME). The default resolution depends on hardware, Windows
; version and currently running programs
;wintimer=0
; trackparam: string: Name of the parameter used to track message through handlers
; If empty or boolean true the default "handlers" will be used instead
; Set to boolean false to disable tracking only if you are sure what you want
;trackparam=handlers
; msgsniff: bool: Activate message sniffer module (if loaded) at engine init time
;msgsniff=disable
; filtersniff: regexp: Default filter to apply to message sniffer at initialization
; If empty it will match all messages except engine.timer which is never displayed
; Example for a filter matching all chan.Anything messages and engine.halt:
; filtersniff=^\(chan\.\|engine\.halt$\)
;filtersniff=
[modules]
; This section should hold one line for each module whose loading behaviour
; is to be changed from the default specified by modload= in section [general]
; Each line has to be of the form:
; modulename.yate=boolean
; Note that modules can be located only in the module directory so no path
; information should be specified
register.yate=true
mysqldb.yate=true
cache.yate=true
cpuload.yate=true
ysipchan.yate=true
yrtpchan.yate=true
yiaxchan.yate=false
SigTransport.yate=false
h323chan.yate=false
LkSCTP.yate=false
callcounters.yate=false
cdrcombine.yate=false
callfork.yate=false
cdrbuild.yate=false
cdrfile.yate=false
presence.yate=false
users.yate=false
accfile.yate=false
eventlogs.yate=false
analog.yate=false
camel_map.yate=false
ccongestion.yate=false
ciscosm.yate=false
clustering.yate=false
dbpbx.yate=false
dsoundchan.yate=false
enumroute.yate=false
extmodule.yate=false
fileinfo.yate=false
filetransfer.yate=false
gvoice.yate=false
heartbeat.yate=false
isupmangler.yate=false
jabberserver.yate=false
openssl.yate=false
jabberclient.yate=false
queuesnotify.yate=false
javascript.yate=false
jbfeatures.yate=false
mgcpca.yate=false
lateroute.yate=false
mgcpgw.yate=false
moh.yate=false
monitoring.yate=false
mux.yate=false
pbxassist.yate=false
queues.yate=false
rmanager.yate=false
sigtransport.yate=false
sip_cnam_lnp.yate=false
sipfeatures.yate=false
ss7_lnp_ansi.yate=false
subscription.yate=false
tdmcard.yate=false
tonegen.yate=false
wpcard.yate=false
yiaxchan.yate=false
ysnmpagent.yate=false
ysockschan.yate=false
ystunchan.yate=false
zlibcompress.yate=false
yjinglechan.yate=false
yradius.yate=false
ysigchan.yate=false
ysipchan.yate=false
[localsym]
; This section is used to force some modules to be loaded without their
; symbols being globally available - if the operating system supports.
; Windows will ignore this section completely.
; Each line has to be of the form:
; modulename.yate=boolean
; pwlib does not clean up properly on Linux so we must disable global symbols
; unfortunately preventing all pwlib plugins from loading
h323chan.yate=yes
[nounload]
; This section is used to prevent some modules from being unloaded from
; memory, although finalization will be attempted if possible.
; Each line has to be of the form:
; modulename.yate=boolean
Javascript.yate=false;
YJingle.yate=false;
[preload]
; Put a line in this section for each shared library that you want to load
; before any Yate module
; Each line has to be of the form:
; /path/to/the/library.so=boolean
; You should specify the full path to the library. Extension is operating
; system specific - usually .so for *NIX systems and .dll for Windows
[postload]
; Put a line in this section for each shared library that you want to load
; after all Yate modules
; Each line has to be of the form:
; /path/to/the/library.so=boolean
; You should specify the full path to the library. Extension is operating
; system specific - usually .so for *NIX systems and .dll for Windows
[debug]
; Each line in this section generates an engine.debug message immediately
; after the first initialization. This is equivalent of issuing the debug
; command in the Remote Manager.
; Each line has to be of the form:
; modulename=parameters to debug
; Examples:
; tone=off
; h323=level 9
; sip=level 8
; sip=filter 127.0.0.1
[variables]
; Each line in this section initializes a variable in the Engine's shared list
; These variables can be accessed and modified from each module
; Examples:
; index1=5
; custom=EXAMPLE
[telephony]
; Default settings for telephony drivers
; timeout: int: Default channel timeout in milliseconds
;timeout=0
; maxroute: int: Maximum number of calls routed at once by each driver
;maxroute=0
; maxchans: int: Maximum number of channels running at once in each driver
;maxchans=0
; dtmfdups: bool: Allow duplicate DTMFs (detected with different methods)
;dtmfdups=disable
Copyright notice : This article is an original blog article , Blog , Without consent , Shall not be reproduced .
Publisher : Full stack programmer stack length , Reprint please indicate the source :https://javaforall.cn/117544.html Link to the original text :https://javaforall.cn
边栏推荐
- 2.13 summary
- C# Linq Demo
- Openresty ngx Lua regular expression
- poj 2762 Going from u to v or from v to u? (infer whether it is a weak link diagram)
- C Primer Plus Chapter 9 question 10 binary conversion
- 使用rewrite规则实现将所有到a域名的访问rewrite到b域名
- Common static methods of math class
- UVA11294-Wedding(2-SAT)
- 2:第一章:认识JVM规范1:JVM简介;
- 3: Chapter 1: understanding JVM specification 2: JVM specification, introduction;
猜你喜欢
Go语言实现原理——锁实现原理
Selenium+Pytest自动化测试框架实战
Southeast Asia e-commerce guide, how do sellers layout the Southeast Asia market?
3: Chapter 1: understanding JVM specification 2: JVM specification, introduction;
Fix the memory structure of JVM in one article
98. 验证二叉搜索树 ●●
Week 17 homework
How to quickly understand complex businesses and systematically think about problems?
一文搞定JVM的内存结构
CorelDRAW plug-in -- GMS plug-in development -- new project -- macro recording -- VBA editing -- debugging skills -- CDR plug-in (2)
随机推荐
Element operation and element waiting in Web Automation
【原创】程序员团队管理的核心是什么?
使用rewrite规则实现将所有到a域名的访问rewrite到b域名
Selenium+Pytest自动化测试框架实战
yate.conf
实现反向代理客户端IP透传
2:第一章:认识JVM规范1:JVM简介;
The method and principle of viewing the last modification time of the web page
From the perspective of quantitative genetics, why do you get the bride price when you get married
3D reconstruction of point cloud
开关电源Buck电路CCM及DCM工作模式
February 13, 2022-4-symmetric binary tree
Douban scoring applet Part-2
3: Chapter 1: understanding JVM specification 2: JVM specification, introduction;
Media query: importing resources
并查集实践
Debian 10 installation configuration
透彻理解JVM类加载子系统
2022 R2 mobile pressure vessel filling review simulation examination and R2 mobile pressure vessel filling examination questions
Pyqt control part (I)