Raspberry pie 3.5-inch white screen display connection

1. Burning system

2. The reader reads SD card , newly build ssh file , newly build

3. Environment configuration
Set up ssh Connect
stay SD Save one in the card ssh Empty file , In order to open ssh function .（ newly build txt Text , Change the file name to ssh.txt, Remember to .txt Delete the ）

Set up wireless network connection
Then set up the Internet , stay tf Card is the current boot Create a new wpa_supplicant.conf The file of , Write the Internet configuration command ：

country=CN
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
 
network={
    ssid=" Fill in your own wifi name "
    psk=" Fill in your own wifi password "
    key_mgmt=WPA-PSK
    priority=1
}