C4D quick start tutorial - Chamfer

C4D edition R24, The following can be ignored . Look directly at the chamfer

Through self-study, I found that the picture was wrong at the beginning , The periphery of the development board is not circular , I thought it was good-looking before , The result is incorrect after mapping , We just use chamfer to change . Now there are real objects , You can measure while doing QAQ

This knowledge point

• Chamfer use

Chamfering

Chamfer is for the points in the model 、 Line 、 Surface tools , The effect is different according to different choices .

1. Build a x Axis 7 centimeter ,y Axis 7.35 centimeter ,z Axis 0.16 Centimeter cube
   

2. Select the object to change it into editable mode , Shortcut key 【c】
   
   What we want to change is the development board 4 Corner , Make it feel less “ just ”.

3. Choose 【 Edge mode 】 At this time, the selection status is real-time selection （9） It's more convenient
   

4. What we need to adjust is 4 One side , So press and hold Shift take 4 Select all
   
   Now pay attention to , Change the wrong side . If selected, it will turn orange , Choose the other three .
   

5. Execute the right mouse button -【 Chamfering 】
   
   Drag and drop .
   

Other instructions related to chamfer

When one of the points is not specially selected , Drag in the blank , This is all the points on the whole model , At this time, the chamfer will change like this

We can also adjust the subdivision in the attribute tool

When there are more sub segments , The original formed surface will become more curved and slippery

When targeting 【 Line 】 When selecting chamfer , This cube will form the effect of a surface at the edge .

Yes 【 Noodles 】 When choosing , You can put the original face , Make a convex surface effect .