AutoCAD - what is the default lineweight for centerline drawing and CAD? Can I modify it?

Creates centerline geometry for the specified linetype associated with selected lines and polylines .

Way of execution

1. Enter the centerline drawing command “CENTERLINE”( Shortcut key ：CL).

Centerline drawing command

2. Select the first line according to the prompt , Click the left mouse button .

The first straight line

3. Next, select the second line , Click the left mouse button .

The second straight line

4. The centerline marking is completed , The annotation effect is shown in the following figure ：

Mark complete

Label effect

use CAD When drawing graphics, the line width will be set to distinguish objects , that CAD Can I change the line width of ？ We will use CAD Dream drawing software to illustrate .

Operating tools

operating system ：Windows10

CAD Software ：CAD Dream drawing

step

1. If you don't know what our current default lineweight is , We can click the line width under the format menu bar below , As shown in the figure below ：

Click line width

2. After clicking, it will appear “ Line width setting ” Dialog box , As shown in the figure below ：

Line width setting dialog box

3. We can see the current default line width in the lower left corner of the line width setting dialog box , As shown in the figure below ：

Default lineweight

4. Then we can select the default lineweight to be modified from the list of line widths , After selecting, click ok , As shown in the figure below ：

Modify the default lineweight

5. Finally, we use the draw circle command to draw a circle , Then the default line width of this circle is what we set in the previous step 0.35mm 了 , As shown in the figure below ：

Modified to complete