The production method of the powered small sailboat is simple, the production method of the electric small sailboat

Water bottles how to make the ship？

准备工具：Two water bottles、硬纸板、铁丝、一次性筷子、彩纸、胶水、胶带、剪刀等.1、First put two chopsticks cross,Then tied with wire,From paper to do another sail pasted.

2、Cut the cardboard ChengFangFang,Use adhesive tape paper paste under the beautification,To poke holes in the middle.3、Take out the two water bottles,Also with wide taped to the bottom of the cardboard,Have a buoyancy so.4、The last to install the sails in middle.

5、Lovely and funny little sailboat completed,Can sail in the water..

Small sailboat to do?

1、Before making handmade,The material we need to be ready to need,Including rectangular plastic foam a,Color paper1—2张,剪刀、A knife to the a,A pair of convenient chopsticks,A pencil,Two rubber rollrfidBBBBBB.

2、First rectangular plastic foam pencil out spindle,Or polygon approximation of spindle,Then spare part gently with a knife cut off,To form the outline of hull.

3、On the top of the boat,Along the outer limits of the hull with a pencil edge0.5The position of the cm on line,Note to draw even,Form a closed polygon graphics.

4、Will line inside the foam cut with the knife,注意,This procedure is not fun,Small make up is to use a knife to cut into the foam inside a a small square piece of,Again the small square dig down one by one,Will eventually hull completed.5、The next thing to make the sails.

First make the sails skeleton,To be broken two convenient chopsticks from about a third place,Put into figure cross shape,As the sails support.Two cross to a large and a small.

6、With a cord tied up in the middle of the two cross,Be careful to cross winding,As far as possible let the cross tie firmly some,Otherwise easy to fall apart,Effect the sailing.

7、The sails skeleton go later,Need to stick on the sails on it,We will double glue to stick on the cross fixed well in advance,如图这样,横竖交叉.8、Double-sided adhesive on white paper to get rid of,With sticky side,So convenient speak color paper glue to the above,Made the sails.

注意,When production is two,Small make up here with a graphs,.9、On the color paper according to draw a triangle with the form of the cross size,Cut with scissors into the shape of a figure,As a sailing boat sail.Cut two same,A slightly larger a slightly smaller.

10、Stick color paper to cross,需要注意的是,Be sure to show at the bottom of the sails of the cross,In order to put the sail boat above.

11、Will good sails and hull combination,Because the boat is foam,所以,Can easily tell the sails into the hull above,这样,Sailing is basic ready.

How to use cans handmade little sailing

Method the following tools material：3个易拉罐、3根筷子、String or yarn、Made of plastic or paper sail、双面胶、橡皮筋.

制作步骤：1、The cans with double-sided adhesive fixed together;2、According to the appearance of the above,Will connect the cans with chopsticks and a rubber band on both sides;3、Drill a hole in the middle of the cans,With chopsticks as the masts of;4、The use of plastic or cardboard handmade a sail,Can draw on it like the design of.

Sail up and down to the open a small hole,Used to secure it to the boom;5、After inserting the sails,With wool or rope will sail with chopsticks,A small boat was completed.注意事项：（1）Can skin rowers（2）When you use the knife to prevent stroke it.

Cans hand-made small sailing practice sails to do

.

Handmade boat material：Three walnut dew cans,2The double round bamboo chopsticks,绳子,Do your own sail,And double-sided adhesive below steps which made small sailboat cans：第一步：Double-sided adhesive in the three cans of sticky side and fixed in the second step together：On both sides of the cans prepared with chopsticks and rope fixed step 3：Use tools to drill a hole in the middle of the cans above（Be careful not to hurt my hand）,With chopsticks step 4：To make a sail（Pay attention to the above and open a small hole to plug into the sail stem）第五步：With a rope fixed boom,And put on the city,An old cansdiyHandmade boat is done！

The making process of the small sailing first and then

The making process of the small boat：1、To prepare a firstA4纸,对折.2、Crease the edge of the two Angle facing the middle crease folding processing.3、Below the rectangle above folded upwards.4、再反过来,The same rectangular turn up.5、Based on the following,And then to stretch on both sides to flattening.

6、The opening Angle of two fold down.7、Then hold down here is two Angle,把它拉开.8、这样就完成了.

Small sailboat materials？

.

实体：The sailing boat hull--Meranti woodx7、钉子x18Sailing boat deck--Meranti woodx8、钉子x12Sailing at the helm of device--Meranti woodx4、钉子x10、Wooden pinionx8、Wooden wheelx5Sailing main powerplant--钉子x10、The wooden blockx1、拉索x1、船桅x1、船帆x1辅助动力装置--Juniper woodx3、螺旋桨x1、Small enginex1所需材料如下：Meranti woodx19Juniper woodx3钉子x50(铁矿x18、柴薪x27)The wooden blockx1(Oak woodx1)Wooden pinionx8(Meranti woodx3)Wooden wheelx5(Meranti woodx5)螺旋桨x1(Oak woodx2)拉索x1(Hemp grassx8)船桅x1(Lauanx4)船帆x1(Hemp grassX160、生橡胶x3、原油x3、柴薪x18)Small enginex1(Red clayx3、Gray clayx4、铁矿x6、原油x1、柴薪x27)合计：Lauanx4Meranti woodx27Oak woodx3Juniper woodx3Hemp grassx168生橡胶x3Red clayx3Gray clayx4铁矿x24原油x4柴薪x72(PuMu18根)模型：人：Staff involved in the production model.

应该掌握：过程管理、计算机CAD制图、工艺加工、机械动力、电工电子、材料应用、Coating adhesive、Modelling sculpture、文字表达、Cost accounting and other basic knowledge and basic skills.This is often through the model ships team（工作室）The quality of personnel structure and combination to realize.

机：Has the production model of special equipment and machinery.This is to solve difficult problems and ensure works are important means of art.从某种角度讲,Exquisite exquisite works,The performance of the play and tools is craft.一般情况下,Things should be and should be,逐步完备.料：Making model material.

Modern ship model making noodles wide material selection,Can not stick to one pattern,Give full play to their creative.But the four principles of select material is still：成本低、易加工、High quality、Strong texture simulation.到目前为止,Wood is still a basic model to make the material.

比如：Racing model,As far as possible in order to improve the speed,Often choose lightweight wutong wood for hull structure;Ship model itself,In order to reflect the hull surface appearance,Often choose bending performance and machining performance good red pine or ginkgo wood;Simulation model of class western ancient sailing,In order to improve the collection value,Europe and the United States of the full performance of primitive simplicity and elegant art and culture,Often choose wood sex stability、The organic and pure、Fine-grained clean the rare wood production of hull and decorative sculpture,The pursuit of appearance and can be collection of works.

环：Production model of the environment.Model studio or model of table layout clever,Directly influence the effect of the model to make.一般情况下,应地、Should people、Things should be and should be.What should follow the basic principles of：Work is convenient and comfortable、Items placed home、Convenient communications.

Specific equipment facilities conditions,As far as possible with：Data storage tank;Works display case;Equipped with necessary equipment machine workbench;水电、照明、空调、电脑、电话、Dust collection facilities;Fire emergency measures etc.法：Model production management method.With the mature application of modern management.

A modern model,Whether amateur,还是专业,Are very focus on process management.在国外,A fine ship model before the production,First of all need to prepare the specification《Model making wi》,Strengthening the management of the process of model making.

《Model making wi》The basic content of the：Work level and repair set book、Make the project budget、图纸资料、Wood materials plan、Production process of single、Time schedule、Test record、External liaison cheat、Expense diary、Propaganda work file is made up of ten including.

《Model making wi》The producers of ship model of work、Participating activities、商务洽谈,It is necessary to have the role of.1.The drawings or according to the appearance of the photo1：1Put the sample.Generally need to main deck,The bottom contour plate and the stern plate.

2.Will three board fixed on the plate glass,As a basic hull outline.3.Paraffin wax vaseline and talcum powder according to the1：1：3混合,Hard paraffin wax proportion sludge,To make a mold hardness is bright and clean,Vaseline proportion sludge soft,便于制作.

No absolute proportion requirements,But according to his be fond of.4.Mix ratio of good raw materials heat melt.Generally do not directly on the fire heating,Burned so easily,Can take large sets of small pot water heating.

5.Use foam plastics and oil mud three-ply board according to the hull to outline,The hull is very rough.Clay sculpture could not have a complete,Can paste a few times more.6.Hull lines made later,Will oil sludge paste on it,This procedure and sculpture almost.

Clay sculpture could not have a complete,Can paste a few times more.7.Finishing this procedure and sculpture almost,Requires skill and patience.8.Use foam plastics and oil mud three-ply board according to the hull to outline,The hull is very rough.Clay sculpture could not have a complete,Can paste a few times more.

Clay paste after start rough machining,Generally take knife,The model plane plane,Work out the basic shape.

9.With a homemade small iron and oil painting knife cooperate with painting knife while ironing with flat,This procedure will be left after processing iron mark,Then again the status of the with a sharp blade scrape on it,You'll see satisfactory results.

10.With a homemade small iron and oil painting knife cooperate with painting knife while ironing with flat,This procedure will be left after processing iron mark,Then again the status of the with a sharp blade scrape on it,You'll see satisfactory results.

11.基本成型12.Finishing tools13.After processed male mold.14.Before undergoing plaster casting,With the floor wax wax in male mold surface,反复进行3-4次,The shiny surface, the better,Easy to draw.

15.With medical anhydrite,Don't use special anhydrite,Because of the anhydrite initial setting time is moderate.16.The die with three-ply board.17.The proportion of gypsum and water as1：1,Winter appropriate reduce the ratio of water,In the summer, appropriately increase the proportion of water.

Gypsum mixing with water to quickly,Time control within a minute,At this time of gypsum as the sticky liquid,Can use skeet spooning it poured into the mould,Pour the order of the first four weeks after the central,Pouring with fast,A long plaster will solidify.

After the completion of the plaster cast,Can use the plaster around the putty knife will properly stack to the middle,Like the shape of the bottom.18.After the completion of the plaster cast,Can use the plaster around the putty knife will properly stack to the middle,Like the shape of the bottom.

19.Draw the time generally after pouring20-30分钟,Then cast a little slight fever.20.Draw the time generally after pouring20-30分钟,Then cast a little slight fever.

When the draw will be the bottom of the hull down flat on a cushion sofa,Holding a glass from around gently respectively to service,After seeing the gypsum can be separated from paraffin wax around the,To raise the entire glass,If out of good,Paraffin male mold or complete.

21.Hull die cavity is completely dry after appearing to glass fiber reinforced plastic production.

First of all, wax on the surface of the hull cavity die that dry3-4次,Secondly to choose the appropriate weather,Dry weather in general requirements,气温30Degrees more than summer more appropriate,If you have oven is another matter,Moreover choose epoxy resin and glass fiber cloth.22.Glass cloth to weave to choose relatively thick and soft.

23.With epoxy resin+Dibutyl fat（增塑剂）+乙二胺（固化剂）按100：12-20：8-12Proportion reconcile,A layer of a layer of epoxy resin fiber glass cloth,船底3-4层,船面2-3层,After pouring the thickness of the hull in2MM左右.

After the completion of the casting in the strong sunlight exposure4-6小时,或在100Degree in heating oven curing2-4小时.24.After the completion of the casting in the strong sunlight exposure4-6小时,或在100Degree in heating oven curing2-4小时.

And then to glass fiber reinforced plastic mold release,修边,Up and down came after involution.25.Congrats hope to adopt！

How do handmade boat

Water bottles recycling,Handmade children toy ship method diagram.思路很简单,The two bottles paste to the bottom of the cardboard,Add a sail on.According to the image below,Just a few steps can reap a toy boat.

如果你对它感兴趣,Might as well follow to try!需要准备：Two water bottles、硬纸板、一次性筷子、纸张、胶带、铁丝、剪刀、胶水.1.To fix two chopsticks crossed,Tied with wire.Then the paper make a triangular sail.

2.With wide tape will cardboard decorate it,Then poke a hole in the middle.3.The two water bottles symmetric paste to the bottom of the cardboard.4.To sail into the hole.5.A simple little sailing boat is ready!.

Manual small sailboat to do?

具体步骤如下.

1.Take a piece of square paper,The edge folded;Will two pairs of edge to the centre fold,The four Angle back/images.yangwajia.com/video/undefined/images/202110/15/ee1b29309989ce00.jpg"/>2.Fold along the middle again,Fold the Angle to the middle on both sides of the past,Fold a,Fold it again;Tidy up after the boat was folded.

/images.yangwajia.com/video/img/202110/15/5ae43b86046982e7.jpg"/>.