How to realize the high temperature alarm of the machine room in the moving ring monitoring system

There are many equipment in the machine room , High calorific value , The temperature of the machine room is too high , The environment of the machine room is muggy and humid , If the refrigeration equipment fails or the refrigeration capacity is insufficient , Under high temperature, the service life of the equipment will be reduced , Reduce the safety of the equipment 、 stability , How to realize the high temperature alarm in the computer room ?

Moving ring monitoring system , It is widely used in computer communication rooms 、IDC Computer room 、UPS Computer room, etc , Unattended site security is required 、 power 、 Environmental monitoring and management . Log in to the fresh air system connected to the machine room in the background 、 Remote switch for ventilation and cooling of air conditioner , Patrol the machine room without leaving home .
　　

There are many equipment in the machine room , With power distribution cabinet 、 The server 、 Switch 、 A firewall 、UPS、 Routers and other devices , need 24 Turn on the machine 24 hours a day , Therefore, the normal temperature of the machine room is particularly important for the equipment , High or low temperature will damage the equipment in the machine room , Ventilation and heat dissipation is one of the deployment conditions that should be considered first in the construction expenditure of the computer room .

High temperature in summer is the high incidence period of high temperature warning , It is easy to have a large load of cooling equipment 、 Insufficient refrigerating capacity , Then the heat spreading capacity decreases and the temperature is too high . Temperature detection alone , Just use the temperature and humidity sensor , The monitoring host receives the temperature and humidity information sent by the sensor , Collect and analyze the data transmitted by the sensor , After the temperature is higher than the threshold set in the background , The audible and visual alarm will immediately send an audible and visual alarm at the scene , The alarm host automatically sends alarm information to the mobile phone , WeChat 、 The computer 、 SMS and other methods , Avoid missing prompts due to a single warning method .

In this way , Realize unattended intelligent alarm , There is no need for personnel to patrol the site , Know whether there is high temperature in the machine room at any time , Send a high temperature alarm to your phone immediately , Home office is possible , Increase of efficiency .

The function of dynamic loop monitoring system is not only temperature monitoring , It can also prevent water leakage 、 fire 、 Access control 、 Power failure, power failure, etc. to monitor and warn , Use the moving ring monitoring system correctly , It can improve the management and control of the machine and other environments .