Hcip -- MPLS experiment

1. Set the public network part

R7 Essentially r4 The customer , Not part of the public network , Therefore, the setting is similar to r7 The connected interface is the silent interface

R7 You can visit r2,3,4 The loopback of

1. to r2,r3,r4 Set up mpls label

1. Set up private network

[r1-LoopBack0]ip add 192.168.1.1 24

[r1-LoopBack0]int g0/0/0

 [r6]int LoopBack 0

[r6-LoopBack0]ip add 192.168.1.1 24

[r6-LoopBack0]int g0/0/0

[r6-GigabitEthernet0/0/0]ip add 192.168.2.1 24

 [r6]rip 1     

[r6-rip-1]version 2

 [r6-rip-1]network 192.168.1.0

 [r6-rip-1]network 192.168.2.0

[r5]int lo0

[r5-LoopBack0]ip add 192.168.4.1 24

[r5-LoopBack0]int g0/0/0

[r5-GigabitEthernet0/0/0]ip add 192.168.3.2 24

[r7]int g0/0/0

[r7-GigabitEthernet0/0/0]ip add 47.1.1.2 24

[r7-GigabitEthernet0/0/1]ip add 192.168.3.2 24

 [r7-GigabitEthernet0/0/1]int lo0

[r7-LoopBack0]ip add 192.168.4.2 24

1. Set up MPLS VPN

R1 Static write r5 The routing