Capstone/cs5210 chip | cs5210 design scheme | cs5210 design data

1 CS5210 brief introduction

Capstone  CS5210 HDMI To VGA The converter combines HDMI Input interface and analog RGB DAC Output . Support internal LDO, Cost savings , Optimize board space . Embedded MCU is based on industry standard 8051 kernel .

CS5210 Suitable for various market systems and display applications , Like a laptop 、 a main board 、 Desktop computer 、 Conversion and docking system .

chart 1-1 CS5210 block diagram

2 CS5210 Parameter characteristics

General

HDMI 1.4 Compatible receiver

VGA Output interface ,DAC The speed is as high as ~200 MHz Pixel rate ,8 position

Video resolution support up to [email protected] as well as [email protected]

Built in oscillator , No external crystals are required

Embedded linear differential regulator （LDO）

Embedded microcontrollers

accord with HDCP 1.4 On the standard film HDCP engine （ Optional ）

On the IC HDCP 1.4 key （ Optional ）

The embedded EDID（ If the terminal device does not ,CS5210 Will respond EDID）

Support EEPROM Free mode by using internal pre writing ROM

Support automatic power saving mode

Support VGA Connection detection

Internal power on reset （POR）

Two channels 16 Bit resolution sigma-delta DAC

I2C From the interface and HDMI DDC The interface can be used for debugging and firmware update .

QFN32 4x4 packing

HDMI Digital input

HDMI 1.4 compatible

Built in high-performance adaptive equalizer

Support hot plug detection

VGA Output interface

The clock frequency is as high as 200 MHz Triple of 8 position DAC（ A / D converter ）

Video resolution support up to [email protected] as well as [email protected]

The embedded V-sync/H-sync 5V Buffer

be used for VGA Of connector pins HBM 4-KV

accord with VESA VSIS v1r2

Embedded microcontrollers

Industrial standards 8051 nucleus

Support I2C Master slave Gundam 400 KHz.

Power and technology

single 5V Power Supply

Ultra low standby power <100uW

3  CS5210 Pin definition

3.1 CS5210 Pin assignments

chart 3-1 CS5210 Pin layout

3.2  CS5210 Pin description

surface 3-1 CS5210 Pin definition

3.3 CS5210 Ordering information

3.4  CS5210 Footprint

 3.5 CS5210 Package size